User manual PIONEER SD-T50W1

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_En CAUTION This product is a class 1 laser product, but this product contains a laser diode higher than Class 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. [. . . ] In such cases, you may need to reduce the signal level of the line source by switching on the attenuator. Press ENTER. 3 Use the / (cursor left/right) buttons to select the attenuation (LINE ATT) display. On the front panel use and 4 Press ENTER. The current setting is shown in the display. . 5 Use the / (cursor up/down) buttons to select a setting. · ATT 6DB ­ Lowers source signal by 6dB · ATT 10DB ­ Lowers source signal by 10dB (EV66/99DVD model only) · ATT OFF ­ Switches attenuation off 6 Press ENTER to confirm. 51 En 09 Viewing JPEG discs Chapter 9 Viewing JPEG discs Playing a JPEG slideshow After loading a CD/CD-R/RW containing JPEG pictures, press to start a slideshow from the first folder/picture on the disc. The player displays the pictures in each folder in alphabetical order. Pictures are automatically adjusted so that they fill as much of the screen as possible (if the aspect ratio of the picture is different to your TV screen you may notice black bars at the sides, or at the top and bottom of the screen). While the slideshow is running: Button What it does Pauses the slideshow; press again to restart. ANGLE Pauses the slideshow and rotates the currently displayed picture 90º clockwise. Pauses the slideshow and zooms the screen (see below). Displays the Disc Navigator screen (see below). · The , ANGLE and ZOOM buttons do not work while the display shows LOADING. 2 Use the cursor buttons ( / / / ) to change the zoomed area. You can change the zoom factor and the zoomed area freely. 3 To resume the slideshow, press (play). 53 En 10 Singing karaoke Chapter 10 Singing karaoke Singing karaoke Using the karaoke features you can plug in a microphone and mix the sound of your own voice with a backing track. The backing track can be anything you like, from a song on the radio, to a dedicated DVD karaoke disc. Adjust the microphone level relative to the backing track. You can also use the radio or a component connected to the auxiliary inputs as source material for a backing track. · If you want to play from a track other than the first, select the track now. Pressing repeatedly switches between these options: · KARAOKE (Vocal cancel) ­ Vocals in the backing track are partially eliminated using EQ. Use for tracks that have a vocal recorded in the right channel. Use for tracks that have a vocal recorded in the left channel. · L+R CH ­ Use to put a single-channel vocal track into the center of the mix. [. . . ] . Bass-reflex bookshelf type (magnetically shielded) System . 200 (W) x 351 (H) x 332. 5 (D) mm Weight . 5. 5 kg Center speaker (S-EV66/99V only) Enclosure . Closed-box bookshelf type (magnetically shielded) System . [. . . ]