User manual PIONEER SE-A611

[. . . ] € Never connect the blue/white cable to the power terminal of an external power amp. Also, never connect it to the power terminal of the auto antenna. Doing so may result in battery drain or a malfunction. • IP-BUS connectors are color-coded. [. . . ] €When you connect the multi-channel processor to this unit, refer to multi-channel processor’s installation manual for the connection method. Left Right  Subwoofer    Subwoofer  Front speaker   Rear speaker     Rear speaker Front speaker Perform these connections when using the optional amplifier. π Connecting the units Connecting the power cord Navigation unit can be connected (AVIC-F220 (sold separately)). Please contact your dealer to inquire about the connectable navigation unit. Note: Depending on the kind of vehicle, the function of 2* and 4* may be different. In this case, be sure to connect 1* to 4* and 3* to 2*. Microphone input (AVH-P3200BT) 4m 26 pin cable (Supplied with Navigation unit) Insert the 26 pin cable in the direction indicated in the figure. RGB input Connecting the units Connecting the units Connecting the system (SE-A611 only) Microphone for hands-free phoning (supplied with Bluetooth adapter) IP-BUS input Bluetooth adapter (e. CD-BTB200) (sold separately) Connecting the units When connecting with optional CD-IU200V cable (AVHP4200DVD only) Microphone for hands-free phoning (supplied with Bluetooth adapter) Wired remote input Hard-wired remote control adaptor can be connected (sold separately). (AVHP4200DVD only) Fuse resistor Violet/white Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE (R) position. This connection enables the unit to sense whether the car is moving forwards or backwards. Connecting the units When connecting with a multi-channel processor Microphone for hands-free phoning (supplied with Bluetooth adapter) Connecting the units Connecting and installing the optical cable connection box WARNING • Avoid installing the optical cable connection box in locations where the operation of safety devices such as airbags is prevented by this unit. Otherwise, there is a danger of a fatal accident. € Avoid installing the optical cable connection box in locations where the operation of the brake may be prevented. Otherwise, it may result in a traffic accident. € Fix the optical cable connection box securely with the hook and loop fastener or lock tie. If the unit is loose, it disturbs driving stability, which may result in a traffic accident. Connecting the units When connecting the external video component and the display Display with RCA input jacks (sold separately) 2. Connect the optical cable to the optical cable connection box. € The rear view camera function is to be used as an aid for backing into a tight parking spot. Do not use this function for entertainment purposes. € Objects in the rear view may appear closer or more distant than they actually are. [. . . ] Fasten the ground lead to the protrusion on the back of the main unit. To audio outputs This product Audio input (L IN, R IN) (SE-A611 only) Multi-channel processor (DEQ-P6600) (sold separately) Screw • When installing the optical cable connection box with the lock tie. Wrap the optical cable and connection box with the protection tape and fasten with the power code using the lock tie. Wrap with the protection tape External video component (sold separately) • It is necessary to set Camera Polarity properly in System when connecting the rear view camera. [. . . ]