User manual PIONEER SE-CL501T

[. . . ] € It is extremely dangerous to allow the display lead to become wound around the steering column or gearshift. Be sure to install the display in such a way that it will not obstruct driving. € Make sure that wires will not interfere with moving parts of the vehicle, such as the gearshift, parking brake or seat sliding mechanism. If you do, the protection circuit may fail to work properly. [. . . ] Otherwise, fire or malfunction may result if they are accidentally detached. STAR STAR T T 3 Connecting the units Parts supplied Parts marked (*) are pre-installed. ) Binding screw* Rubber bush Double-ended screw Touch panel pen 4 Connecting the units Connecting the system English USB cable Connect to sparately sold USB device. 5 m This product 20 cm Multi-CD player (sold separately) iPod with Dock connector Wired remote input Hard-wired remote control adaptor can be connected (sold separately). , CD-I200) (sold separately) 5 Connecting the units Connecting the power cord Note: Depending on the kind of vehicle, the function of 3* and 5* may be different. In this case, be sure to connect 2* to 5* and 4* to 3*. 1* 3* 2* Antenna input Fuse (10 A) 5* 4* This product Connect leads of the same color to each other. Cap (1*) Do not remove cap if this terminal is not in use. Yellow (3*) Back-up (or accessory) Yellow (2*) Connect to the constant 12 V supply terminal. Fuse resistor ISO connector Note: In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors. left Right  Front speaker        Front speaker Rear speaker or Subwoofer Rear speaker or Subwoofer Note: · Change the initial setting of this unit (refer to the Operation Manual). The subwoofer output of this unit is monaural. Perform these connections when using the optional amplifier. 8 Connecting the units When connecting with a rear view camera When this product is used with a rear view camera, it is possible to automatically switch from the video to rear view image when the gear shift is moved to REVERSE (R). € The rear view camera function is to be used as an aid for backing into a tight parking spot. Do not use this function for entertainment purposes. € Objects in the rear view may appear closer or more distant than they actually are. CAUTION You must use a camera which outputs mirror reversed images. cAUTION • The screen image may appear reversed. This connection enables the unit to sense whether the car is moving forwards or backwards. It is necessary to set CAMERA POLARITY properly in SYSTEM MENU when connecting the rear view camera. [. . . ] Install this unit and fasten the screws. Rubber bush Double-ended screw Before installing this unit • Remove the holder. Loosen the screws (3 × 6 mm) to remove the holder. Fastening the unit to the factory radio-mounting bracket. [. . . ]