User manual PIONEER SE-CL531

[. . . ] Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. [. . . ] The MAINS plug of unit should be unplugged from the wall socket when left D3-4-2-2-2a_En unused for a long period of time. If naked flame sources accidentally fall down, fire spread over the apparatus then may cause fire. When disposing of used batteries, please comply with governmental regulations or environmental public instruction's rules that D3-4-2-3-1_En apply in your country/area. Provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, to prevent fire hazard, the openings should never be blocked and covered with items, such as newspapers, table-cloths, curtains, etc. Also do not put the apparatus on the thick carpet, bed, D3-4-2-1-7b_En sofa, or fabric having a thick pile. Operating environment temperature and humidity: +5 ºC ­ +35 ºC (+41 ºF ­ +95 ºF); less than 85 %RH (cooling vents not blocked) Do not install in the following locations · Location exposed to direct sunlight or strong artificial light · Dolby Headphone technology allows you to enjoy high quality surround sound from any kind of audio/video source, including DVD, TV, VCR, game console and PC. Connection to audio and video components is easy, using just a single cable. Rechargeable nickel-metal hydride batteries (included) or dry-cell batteries (sold separately) can be used to power the headphones. Large volume control knob on the headphones makes for easy adjustment. What's in the box Check that all of the components and accessories are included before setting up the system. 3 CHARGE indicator Lights when the rechargeable batteries are being charged. However, it does not affect the transmission area. Use the two screws to fix the transmitter to the stand. You can connect the digital output of a DVD player, LD player, digital TV, etc. Directly to one of the DIGITAL IN jacks on the transmitter unit using either the supplied coaxial digital cable, or a commercially available optical digital cable. Digital output from DVD player, LD player, Digital TV, etc. An AC-3 RF input is not provided with this system. AC-3 RF signals from LD players cannot be directly input. (The DIGITAL indicator on the front panel flashes if the sample rate is not compatible. ) Set the digital output of your DVD player to 48kHz. Use the analog inputs when playing DAT tapes in LP mode (with 32kHz sample rate). This system does not support MPEG-2 AAC format. [. . . ] Refer to the operating instructions supplied with the DVD player and change the setting to Dolby Digital. The surround sound effect is not obtained. The DTS digital output setting on the DVD player (including game light up. Refer to the operating instructions supplied with the DVD player and set the DTS digital output setting to ON. [. . . ]