User manual PIONEER SE-CL541

[. . . ] Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. [. . . ] ¶ Listen to the sound at the current frame to determine the Cue point. Turn the Jog dial slowly and then return it to just before the point from which you wish to begin playback. (The cue point thus defined will consist of that point directly after the sound which can be heard during a cueing pause. Press the CUE button when you reach the desired frame number or hear the sound at the point from which you wish to begin cueing. ¶ The sound will mute and the time will appear in the display, indicating that the cue point has been stored to memory. ¶ Each time a new Cue point is stored to memory, the previous Cue point will be erased. In the CDJ mode, to set the Cue point, go through steps 2 and 3 as mentioned above. 7 Setting the Cue point in the VINYL mode 1. During playback, at the point you wish to set as the cue point, either press and hold the surface of the Jog dial, or press the PLAY/PAUSE button (6) to enter the standby mode. While pressing the surface of the Jog dial, turn back the dial to a point just before the track you wish to play. When the sound is the track being searched for, press the CUE button while you are still pressing the surface of the Jog dial. The Jog dial operates differently when the surface of the Jog dial is pressed. ) ¶ In proportion to the amount of rotation, the playback speed is accelerated (FWD+) or decelerated (REV–). ¶ When rotation stops, the disc returns to normal speed. Turning Jog dial during playback (scratch play) (See page 24: Scratch Play) 3. ¶ When the CD is rotated once using the Jog dial, 1. 8 seconds (135 frames) of music is played back. During playback or turning in the pause condition (Spin) Refer the [How to Spin] advanced operation. During playback, rotate the Jog dial while holding the SEARCH button (1, ¡) depressed. (Super-fast search) Hold down the button while turning the Jog dial in the direction you wish to search to enter fast forward or fast reverse mode. Do not put objects on the Jog dial or apply too much force. Do not put drinks on the Jog dial as it may leak inside the dial and be the cause of a malfunction. [. . . ] Pressing the LOOP OUT button does not start loop play. The Jog dial does not operate as desired. The picture of the TV screen is fluctuated or FM broadcast is interfered with noise. The disc is not rotating when power is ON. [. . . ]