User manual PIONEER SE-CN25DN-Z1

[. . . ] d3-4-2-1-1_A1_En WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. D3-4-2-1-3_A1_En WARNING Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. [. . . ] 01 Before you start 1-1 What’s in the box 1 2 3 4 5 Digital cordless transmitter Digital cordless headphones Stereo Audio cable (1. 2 Self-adjusting headband The headband automatically adjusts when you put the headphones on. 3 POWER indicator Lights when the headphones are on. 1-2 Names and Functions of Parts 1 Digital cordless transmitter 1 POWER/CHARGE Indicator Lights green when operating; lights red when recharging. 5 SIGNAL indicator Lights steadily when communicating with transmitter. 6 Charging contacts 7 Ear pads 2 DC IN jack Connect the supplied AC adaptor to this jack. Using adaptors with different plug polarities or other characteristics could cause malfunction. ) 3 AUDIO IN jacks Analog input jacks for connection to audio/ video equipment such as a DVD player or TV. 4 Charging contacts 4 En 02 Getting started 2-1 Inserting the batteries 1 Remove the headphones’ right (R) side ear pad in the direction of the arrow (see illustration 2-1. 2 Confirm the “+” and “–“ poles and insert the batteries as shown in illustration 21. 3 Replace the ear pad in its original position. Using other AC adaptors may cause malfunction. € Even AC adaptors with the same voltage and plug polarity can damage this product due to the current capacity or other factors. 5 En 03 Operation 3-1 Using the system 1 Turn on audio source component. 2 Press the POWER button on the headphones. To turn ON the headphones, press and hold the POWER button. 3-3 Auto power OFF function When no signal is received from the transmitter, the headphones’ SIGNAL indicator will go out and no sound will be produced from the headphones. If this condition continues for five minutes the headphones power will automatically turn OFF. 3-4 Auto mute function 3 When power is turned ON, communication begins between the transmitter and headphones. When communication is established between the transmitter and headphones, the SIGNAL indicator lights green and sound is produced from the headphones. If the distance between the transmitter and headphones exceeds the allowable transmission distance, the SIGNAL indicator will turn OFF and the headphones will be automatically muted. In this event, move closer to the transmitter. [. . . ] € Check the connection between the transmitter and the AV components. € Check the batteries are placed in correct polarities. € Start playback after checking that the power is turned on for the TV or audio playback device used. € Raise the headphones’ sound volume. [. . . ]