User manual PIONEER SG-9500

[. . . ] Should this unit fail to operate properly, please contact your dealer or nearest authorized PIONEER Service Station. Do not allow this unit to come into contact with liquids. Also, damage to this unit, smoke, and overheating could result from contact with liquids. "CLASS 1 LASER PRODUCT" This product contains a laser diode of higher class than 1. [. . . ] Operation is complete even if the menu is cancelled before being confirmed. The following functions are still accessible from the unit even if the control mode is set to IPOD. -- Volume -- Fast forward/reverse -- Track up/down -- Pausing -- Switching the text information !When the control mode is set to IPOD, operations are limited as follows: -- Only CTRL (control mode), PAUSE (pause) and S. rTRV (sound retriever) functions are available. -- Browse function cannot be operated from this unit. ALBUMS ­ Play back songs from a randomly selected album in order. For details about the settings, refer to Playing songs related to the currently playing song on the previous page. For details about the settings, refer to Operating this unit's iPod function from your iPod on the previous page. After selecting, perform the following procedures to set the audio function. Adjustment range (front/rear): F15 to R15 Adjustment range (left/right): L15 to R15 FR 0 is the proper setting when only two speakers are used. Note Operation is complete even if the menu is cancelled before being confirmed. Wrap adhesive tape around wiring that comes into contact with metal parts to protect the wiring. -- Place all cables away from moving parts, such as the gear shift and seat rails. -- Place all cables away from hot places, such as near the heater outlet. -- Do not connect the yellow cable to the battery by passing it through the hole to the engine compartment. -- Cover any disconnected cable connectors with insulating tape. -- Never cut the insulation of the power cable of this unit in order to share the power with other devices. When this unit is on, control signals are sent through the blue/white cable. Connect this cable to the system remote control of an external power amp or the vehicle's auto-antenna relay control terminal (max. If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal. Never connect the blue/white cable to the power terminal of an external power amp. [. . . ] Please refer to the information from the disc manufacturer for more detailed information about DualDiscs. Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name. This unit may not operate correctly depending on the application used to encode WMA files. There may be a slight delay when starting playback of audio files embedded with image data. [. . . ]