User manual PIONEER SG-9800

[. . . ] 2 Press the right side of the front panel until it is firmly seated. # If you can't attach the front panel to the head unit successfully, try again. Front panel may be damaged if you attach the front panel forcedly. Protecting your unit from theft The front panel can be detached to deter theft. [. . . ] When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal, the vehicle's antenna extends when this unit's source is turned on. 4 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. # You can cancel seek tuning by briefly pressing c or d. # If you press and hold c or d you can skip stations. Seek tuning starts as soon as you release the button. % When you find a frequency that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing. memorized radio station frequency can be recalled by pressing the preset tuning button. # Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory. # You can also use a and b to recall radio station frequencies assigned to preset tuning buttons 1 to 6. Turning the unit off % Press SOURCE and hold until the unit turns off. SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Settings are based on the FM volume level, which remains unchanged. The AM volume level can also be adjusted with source level adjustments. 1 Compare the FM volume level with the level of the source you wish to adjust. Turning the clock display on or off You can turn the clock display on or off. Even when the sources are off, the clock display appears on the display. % Press CLOCK to turn the clock display on or off. Each press of CLOCK turns the clock display on or off. # The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds. Using the initial settings, you can customize various system settings to achieve optimal performance from this unit. 1 Press SOURCE and hold until the unit turns off. [. . . ] Also, wipe any dump discs with a soft cloth. Playback of discs may not be possible because of disc characteristics, disc format, recorded application, playback environment, storage conditions and so on. Road shocks may interrupt disc playback. Read the precautions with discs before using them. [. . . ]