User manual PIONEER SPEC-1

[. . . ] The following caution label appears on your unit. Operating environment temperature and humidity: +5 ºC ­ +35 ºC (+41 ºF ­ +95 ºF); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or D3-4-2-1-7c_A_En strong artificial light) When using this product follow the instructions written on the underside of the unit, which concern rated voltage, etc. CAUTION The POWER switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. [. . . ] This player does not support playback of 8 cm DVDs. Do not attempt to use adapters meant for 8 cm CDs, since the adapter may come loose during rotation, causing damage to the disc or player. 1 When playing 8 cm CD singles, be sure to use an adapter designed for 8 cm CDs. Before loading the disc into the player, confirm that the disc is fastened correctly by the adapter's tabs. If an 8 cm disc is loaded by mistake without an adapter, immediately press the EJECT (0) button and remove the disc. If the disc is not ejected the first time the EJECT (0) button is pressed, press the button again. 2 Use only 8 cm disc adapters that feature the ' logo mark (recommended compatible adapters). When mounting the disc to an adapter, confirm that the disc is able to rotate freely, and is not bent or warped. Buttons and controls with the Buttons and controls with the Mark are disabled when the NORMAL/DJ switch is set to NORMAL. Mark are disabled when the NORMAL/DJ switch is set to DJ. When a commercial DVD title is loaded, the initial default cautionary warnings will be displayed first (these warning messages cannot be skipped). This function is used to skip non-recorded (silent) portions at the beginning of tracks and automatically set the cue point ( P. 36) immediately before actual sound begins when loading a disc, performing track search (chapter search), and when the playback track (chapter) changes. If the track signal cannot be found within ten seconds, the track's beginning will be set as the cue point. ¶ Some DVDs prohibit the use of playback pause; in this case pressing the PLAY/PAUSE (6) button will cause the prohibited mark to will appear on the light, and the corresponding prohibited mark monitor. ¶ If the PLAY/PAUSE (6) button is pressed when the player is in the pause (standby) mode, the play/pause indicator will light and playback will begin. ¶ If the pause mode is allowed to continue for 100 minutes or more, the disc playback will automatically stop. in this case , press the PLAY/ PAUSE (6) button to resume playback. [In DJ mode, with jog mode set to VINYL mode OFF] ¶ Placing the player in pause mode enables audible pause (the video image appears as a still image, but audio sound can be heard intermittently). If sound is not desired in this case, lower the audio mixer's output level. [In DJ mode, with jog mode set to VINYL mode ON] ¶ Placing the player in pause mode enables silent pause (still image with no sound). ¶ The TOUCH/BRAKE response dial can be used to modify the disc's deceleration speed (time until playback stops). [. . . ] Displayed when the card loaded does not conform to SD memory card standards, or was not formatted on a CDJ-1000, CDJ-1000MK2 (MMC). displayed to indicate corrupted memory card. Displayed when the total number of cue points and loop points recorded has already reached 100. displayed when setting a point for a copyprotected disc. [. . . ]