User manual PIONEER SX-303RDS

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_En-A WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain D3-4-2-1-3_A_En or moisture. This product complies with the Low Voltage Directive (73/23/EEC, amended by 93/68/EEC), EMC Directives (89/336/EEC, amended by 92/31/EEC and D3-4-2-1-9a_En 93/68/EEC). WARNING Before plugging in for the first time, read the following section carefully. [. . . ] · Note that audio and subtitle languages cannot be changed during the recording of a digital broadcast. REC TV tuner setup for Pause Live TV To use this feature with an external TV tuner, the recorder must be connected to your TV using a SCART cable, and the AV. Link setting (page 145) should be set to This Recorder Only. 2 See also Pause Live TV on page 145 for more on this. In order to use Pause Live TV, make the following connections and settings. · Pause Live TV will not work as expected when watching TV via an external component such as a VCR or digital tuner. It only works with the channel selected on the TV. Important · Pause Live TV only works with the built-in A. TV (analog) tuner. It does not work with the D. TV tuner or the external inputs. Make sure the Auto Channel Setting is set to Download from TV (see Auto Channel Setting on page 139). 1 Connect this recorder to your TV with a SCART cable. 2 Press HOME MENU. ì Start recording. 7 If you want to set a recording end time, press the ì REC button repeatedly. · Note that it may take up to 10 seconds for recording to start. PLAY 2 Press to start playback. You can also use the scan buttons ( / ), pause ( PAUSE) and stop ( STOP) -- all without affecting the recording. · When the Pause Live TV setting (see page 145) is set to TV's Tuner, you can press PAUSE LIVE TV while the recorder is in standby to switch on and immediately start recording. When set to Recorder's Tuner, it is not possible to use the Pause Live TV feature from standby. · After pressing PAUSE LIVE TV, it will take at least 10 seconds for the picture to change (during this time, all controls except the power button are inoperative). (Note that startup from standby is not possible if you have selected Recorder's Tuner in Pause Live TV on page 145. ) · Please note that you can't record from another component (VCR, etc. ) that is connected by a SCART cable to the AV2 (INPUT 1/DECODER) connector using the Pause Live TV feature. Operation table Viewing source TV built-in analog tuner TV/DVD Pause Live TV DVR source mode of DVR function button TV ­ Pause Live TV Condition Preset channel of DVR and TV are matched after downloading from TV. Direct TV recording*1 Preset channel of DVR and TV are NOT matched after downloading from TV. Record TV programme that you're watching. TV built-in digital tuner TV ­ Direct TV recording*1 Preset channel info. in D. TV cannot be shared by DVR even after Download from TV. Record TV programme that you're watching. Direct TV recording*1 Record TV programme that you're watching. External input of TV DVR built-in analog tuner DVR built-in digital tuner TV DVD DVD ­ DVR built-in Pause Live TV analog tuner DVR built-in Pause Live TV digital tuner *1 No Chase Play!Warning if you change input this will stop the recording. 2 · Not all TVs support this feature. [. . . ] . AV connector (Input 1), RCA jack (Input 2, Input 3) Video output . AV connector (AV1), RCA jack (Output) S-Video input . AV2 (Input 1), Input 2 (front), Input 3 (rear) Y (luminance) - Input level . . AV connector (Input 1), 4 pin mini DIN (Input 2, Input 3) S-Video output. [. . . ]