User manual PIONEER SX-305RDS

[. . . ] To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain D3-4-2-1-3_A_En or moisture. WARNING Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e. g. , 230V D3-4-2-1-4_A_En or 120V) written on the rear panel. Operating Environment Operating environment temperature and humidity: +5 ºC ­ +35 ºC (+41 ºF ­ +95 ºF); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or D3-4-2-1-7c_A_En strong artificial light) This product is for general household purposes. Any failure due to use for other than household purposes (such as longterm use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period. [. . . ] You can see the recording time on-screen and in the front panel display. When the recording ends, the recorder automatically switches into standby if no other operation is being performed. · To cancel the set recording time, press ì REC. · If you want to pause recording at any time, press . (If recording to the HDD or in VR mode, a new chapter is started after recording restarts) 4 To stop the recording, press STOP REC. · If you set the recording time in step 3, you can still stop the recording anytime by pressing STOP REC. · Recording will stop automatically when there is no more space on the HDD/DVD, or after 12 hours of HDD recording (whichever is sooner). 82 En Recording 06 Tip · You can press TV DIRECT REC while the recorder is in standby to switch on and immediately start recording. · Please note that you can't record from another component (VCR, etc. ) that is connected by a SCART cable to the AV2/(INPUT 1/DECODER) connector using the TV Direct Recording feature. Important · A timer recording can't be set if there are already 32 timer programs waiting to be recorded. · Timer recording will not start if: ­ The recorder is already recording. ­ A disc is being initialized, finalized or unfinalized. · Timer recording will start when the operation preventing timer recording has finished. · Use the REC MODE button to set the recording quality. Press repeatedly to switch between XP, SP, LP, EP, SLP, SEP and AUTO (and MN if manual recording mode is on). · DVD recording: The AUTO option automatically sets the best recording quality for the space available on the disc loaded at the time of recording. · HDD recording: The AUTO option automatically sets the best recording quality that would fit on to a blank DVD disc. · Press DVD to record to DVD disc, or HDD if you want to record to the hard disk drive. 3 Use / / / to move the cursor to the recording start date and time on the grid. · You can move the cursor forward or back an hour at a time using the and buttons. Current time Recording start time Easy Timer Recording 8:00 9:00 10:00 11:00 12:00 13:00 14:00 VIDEO INPUT HELP INFO GUIDE CLEAR DISC NAVIGATOR TUNE + DVD MENU TOP MENU RDS DISP ST ­ HOME MENU SYSTEM SETUP ENTER ST + RETURN TEST TONE TUNE ­ DISPLAY BACK CM SKIP PREV REC NEXT STOP REC STEP/SLOW REC MODE ONE TOUCH COPY ì SURROUND AUDIO ADVANCED SUBTITLE SOUND ANGLE TIMER REC PLAY MODE TV INPUT CHANNEL VOLUME TV/DVD TV DIRECT REC SHIFT TV CONTROL 1 Press HOME MENU and select `Easy Timer'. 1/01 2/01 3/01 SAT 1/01 Pr 7 11:45 REC MODE SP ­ ­­:­­ HDD/DVD HDD CHANNEL +/­ Disc Navigator GUIDE Plus+ Easy Timer Play Mode Photo Viewer Disc Setup Initial Setup Video/Audio Adjust Copy Jukebox Each row of the grid is one day (you can set the timer recording for up to a month in advance). The darker area represents time that has already passed and can't therefore be selected. The lighter area is time that's available. The start date and time is displayed in the middle of the screen. · You can go back and reset the start time if you need to by pressing RETURN. Note 1. You can't use VPS/PDC with Easy Timer Recording. [. . . ] Input 1, 3 (rear), 2 (front) Y (luminance) - Input level . AV connector 2 (Input 1), 4 pin mini DIN (Input 2, 3) S-Video output . AV1, Output Y (luminance) - Output level . AV connector 1 (AV1), 4 pin mini DIN (Output) 154 En Additional information 15 Component video output Output level . [. . . ]