User manual PIONEER SX-737

[. . . ] To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain D3-4-2-1-3_A_En or moisture. WARNING Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e. g. , 230V D3-4-2-1-4_A_En or 120V) written on the rear panel. If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. [. . . ] If you set up the system for Front surround (page 7), the Front Surround modes will give the best results (see Using Front Surround above). 7 SURROUND English 8 9 ADVANCED 8 9 ADVANCED + INPUT CHANNEL + VOLUME DISPLAY + INPUT CHANNEL + VOLUME DISPLAY ­ ­ RDS DISP AXD7442 ­ ­ RDS DISP AXD7442 · Press ADVANCED to select a Front Surround mode. Press repeatedly to select FRTMOVIE, FRTMUSIC or EXTPOWER. Turn each surround speaker so that the arrow at the base is lined up with the FRONT SURROUND arrow on the front speaker. This is only necessary with the FRTMOVIE or FRTMUSIC modes. With EXTPOWER (Extra Power), line up the arrow with the EXTRA POWER arrow (the surround speakers should be in the same direction as the front speakers. ). · Press ADVANCED to select an Advanced Surround mode. Press repeatedly to select: · ADVMOVIE ­ Suitable for movies · ADVMUSIC ­ Suitable for music · EXPANDED ­ Wide sound field · TV SURR. ­ Surround sound for mono or stereo TV broadcasts · SPORTS ­ Suitable for sports programming · GAME ­ Suitable for TV game units · VIRTUAL ­ A virtual surround effect using just the subwoofer and front speakers. · 5 STEREO ­ Powerful surround sound for stereo music sources Listening in stereo You can listen to any source--stereo or multichannel--in stereo. When playing a multichannel source, all channels are downmixed to the front left/right speakers and the subwoofer. MCACC /TUNE TEST TONE VIDEO IN FRTMOVIE / FRTMUSIC EXTPOWER 7 8 SURROUND 9 SOUND + INPUT CHANNEL + VOLUME DISPLAY ­ ­ RDS DISP AXD7442 · Press SURROUND repeatedly until STEREO shows in the display. · You can also use the SURROUND button on the display unit to change the listening mode. 19 En 05 Listening to your system Using the Sound Retriever When audio data is removed during the MP3 or WMA compression process, sound quality often suffers from an uneven sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound back to compressed 2-channel audio by restoring sound pressure and smoothing jagged artifacts left over after compression. 7 8 0 JUKE BOX Enhancing dialogue The Dialogue Enhancement feature is designed to make the dialogue stand out from other background sounds in a TV or movie sound track. 1 Press SOUND. 2 Use the / (cursor left/right) buttons to select DIALOGUE then press ENTER. There are three tuning modes--manual, auto, and highspeed: · Manual tuning: Press TUNE +/­ repeatedly to change the displayed frequency. · Auto tuning: Press and hold TUNE +/­ until the frequency display starts to move, then release. The tuner will stop on the next station it finds. · High-speed tuning: Press and hold TUNE +/­ until the frequency display starts to move rapidly. Keep the button held down until you reach the frequency you want. If necessary, fine tune the frequency using the manual tuning method. Memorizing stations You can save up to 30 station presets so that you always have easy access to your favorite stations without having to tune in manually each time. 1 Tune to an AM or FM radio station. For the FM band, select mono or auto-stereo reception as necessary. This setting is saved along with the preset. 2 Press SETUP. 3 Use the / (cursor left/right) buttons to choose ST. MEM. 4 Use the / (cursor up/down) buttons to select the station preset you want then press ENTER. Improving poor FM reception If you're listening to an FM station in stereo but the reception is weak, you can improve the sound quality by switching to mono. Listening to station presets 1 2 Make sure the tuner function is selected. Use the ST +/­ buttons to select a station preset. 1 Tune to an FM radio station then press SETUP. 2 Use the / (cursor left/right) buttons to choose FM MODE then press ENTER. [. . . ] · Background noise is too high to complete MCACC setup successfully. · An error occurred during MCACC setup because the microphone is not connected or is not connected properly. · An error occurred during MCACC setup because the speakers are not connected or are not connected properly. · Contact your Pioneer authorized service center or your dealer for servicing. [. . . ]