User manual PIONEER SX-SW606 (RCS-606H)

[. . . ] RCS-606H SX-SW606 S-ST606 DVR-640H-AV Audio Multi-channel Receiver Subwoofer Speaker System DVD Recorder RCS-505H SX-SW404 S-ST404 DVR-640H-AV Audio Multi-channel Receiver Subwoofer Speaker System DVD Recorder RCS-404H SX-SW404 S-ST404 DVR-440H-AV Audio Multi-channel Receiver Subwoofer Speaker System DVD Recorder TM Discover the benefits of registering your product online at www. pioneer. co. uk (www. pioneer-eur. com) TM Operating Instructions Thank you for buying this Pioneer product. Please read through these operating instructions so that you will know how to operate your model properly. After you have finished reading the instructions, put them in a safe place for future reference. IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. [. . . ] · Approximately two minutes before a timer recording is set to start, the recorder will go into timer recording standby. In timer recording standby you cannot use some functions. · The maximum length for timer recordings made to the HDD is 24 hours. However, because one title (HDD) is limited to 12 hours, recordings over 12 hours will be spread over two titles. Note that there will be a break in the recording of a few seconds between titles. · VPS/PDC may not work with all broadcast stations in your country/area. Check with the stations for compatibility. · The hours between 3:00 and 5:00 in the morning are used by the GUIDE Plus+ system to download program information. During these times, VPS/PDC may not work reliably; leave VPS/PDC off if you set a timer recording for these times. Easy Timer Recording As the name suggests, Easy Timer Recording makes setting up a timer recording as simple as possible. 1 1 HOME MENU Select `Easy Timer' from the Home Menu. 2 PREV NEXT Set the TV channel to record. Easy Timer Recording 8:00 1/01 2/01 3/01 SAT 9:00 10:00 11:00 12:00 13:00 14:00 1/01 Pr 7 9:30 REC MODE SP ­ ­­:­­ HDD/DVD HDD 3 Set the recording quality. · DVD recording: The AUTO option automatically sets the best recording quality for the space available on the disc loaded at the time of recording. · HDD recording: The AUTO option automatically sets the best recording quality that would fit on to a blank DVD disc. HDD/DVD REC MODE 4 Select the HDD or DVD for recording. ENTER 5 Move the cursor to the recording start date and time on the grid. · You can move the cursor forward or back an hour at a time using the and buttons. Current time Recording start time Easy Timer Recording 8:00 1/01 2/01 3/01 SAT 9:00 10:00 11:00 12:00 13:00 14:00 1/01 Pr 7 11:45 REC MODE SP ­ ­­:­­ HDD/DVD HDD Each row of the grid is one day (you can set the timer recording for up to a month in advance). The darker area represents time that has already passed and can't therefore be selected. The lighter area is time that's available. Note 1. You can't use VPS/PDC with Easy Timer Recording. Set a scheduled recording using the GUIDE Plus+ system if you want to use VPS/PDC. 80 En Recording 06 6 ENTER Set the start time. The start date and time is displayed in the middle of the screen. · You can go back and reset the start time if you need to by pressing RETURN. Stopping a timer recording English STOP REC 1 Press during a timer recording. ENTER 2 ENTER Select `Yes' to confirm. 7 Move the cursor to the recording end time on the grid. Recording start time Recording end time Easy Timer Recording 11:00 1/01 2/01 3/01 SAT 12:00 13:00 14:00 15:00 16:00 17:00 Preventing use of the recorder before a timer recording (child lock) You can make all the front panel and remote control buttons inoperative using the child lock feature. This is useful when you set a timer recording and want to make sure that the timer settings are not changed before recording has finished. RECORDER 1/01 Pr 7 11:45 ­ 13:45 REC MODE SP HDD/DVD HDD 1 If the recorder is on, switch it into standby. As you move the cursor around the grid, an arrow stretches from the start time to the current cursor position, representing the length of the recording. A recording of up to six hours can be set. 8 ENTER 2 [Front panel] Press and hold for three seconds to lock the controls. The front panel display briefly shows LOCK. [. . . ] AV connector 2 (Input 1), RCA jacks (Input 2) Audio output . . 2 V rms (Output impedance: less than 1. 5 k) Jacks . AV connector 1 (AV1), RCA jacks (Output) Control input . 4 pin (front) (i. LINK/IEEE 1394 standard) G-LINKTM . [. . . ]