User manual PIONEER TX-9500

[. . . ] Before You Start Information to User 3 About this unit 3 In case of trouble 3 Demo mode 3 Resetting the microprocessor 4 About this manual 4 Operating this unit Head unit 5 Remote control 5 Display indication 6 Basic Operations 6 Use and care of the remote control 7 Using Bluetooth telephone 8 ­ Setting up for hands-free phoning 8 ­ Basic Operations 8 Menu operations identical for function settings/audio adjustments/initial settings/ lists 9 Tuner 9 ­ Basic Operations 9 ­ Storing and recalling stations 9 ­ Function settings 9 CD/CD-R/CD-RW and USB storage devices 10 ­ Basic Operations 10 ­ Displaying text information 10 ­ Selecting and playing files/tracks from the name list 11 ­ Advanced operations using special buttons 11 ­ Function settings 11 iPod 12 ­ Basic Operations 12 ­ Displaying text information 12 ­ Browsing for a song 12 ­ Advanced operations using special buttons 13 This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person's body (excluding extremities: hands, wrists, feet and ankles). Always keep the volume low enough to hear outside sounds. If the battery is disconnected or discharged, any preset memory will be erased. [. . . ] -- Volume -- Fast forward/reverse -- Track up/down -- Pausing -- Switching the text information !When the control mode is set to iPod, operations are limited as follows: -- Only CTRL (control mode), PAUSE (pause) and S. rtrv (sound retriever) functions are available. -- The browse function cannot be operated from this unit. For details about the settings, refer to Playing songs related to the currently playing song on the previous page. For details about the settings, refer to Operating this unit's iPod function from your iPod on the previous page. Important Be sure to park your vehicle and apply the parking brake when performing this operation. # You cannot operate this step during a call. After selecting, perform the following procedures to set the function. To delete a cellular phone information from the device list. While this function is in use, do not turn off the engine. SLA (source level adjustment) SLA (Source Level Adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. When selecting FM as the source, you cannot switch to SLA. Settings are based on the FM volume level, which remains unchanged. Before adjusting source levels, compare the FM volume level with the level of the source you wish to adjust. The AM volume level can also be adjusted with this function. Note Operation is complete even if the menu is cancelled before being confirmed. 1 Press SRC/OFF and hold until the unit turns off. After selecting, perform the following procedures to set the initial setting. Language (multi language) Menu language related to Bluetooth telephone can be changed. Some characters may not be displayed properly. FM step (FM tuning step) The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. [. . . ] There may be a slight delay when starting playback of audio files on a USB storage device with numerous folder hierarchies. Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name. This unit may not operate correctly depending on the application used to encode WMA files. There may be a slight delay when starting playback of audio files embedded with image data. [. . . ]