User manual PIONEER VSX-1016V-S

[. . . ] AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-1016V-S VSX-1016V-K Operating Instructions IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_En-A WARNING Before plugging in for the first time, read the following section carefully. [. . . ] 3 Select `OK' to copy and confirm. 39 En 08 The System Setup menu Tip · Changing the frequency curve of one channel too drastically will affect the overall balance. If the speaker balance seems uneven, you can raise or lower channel levels using test tones with the TRIM feature. Use / to select TRIM then use / to raise or lower the channel level for the current speaker. 4 When you're finished, press RETURN. You return to the Manual MCACC setup menu. 1 Select `Manual SP Setup' then press ENTER. System Setup 1. Surr Back System 2. Auto MCACC 3. Manual MCACC 4. Manual SP Setup 5. Input Assign 6. Other Setup 4. Manual SP Setup a. Speaker Setting b. Crossover Network c. Channel Level d. Speaker Distance e. THX Audio Setting f. THX Speaker Setup : Exit :Return 2 Select the setting you want to adjust. If you are doing this for the first time, you may want to adjust these settings in order: · Speaker Setting ­ Specify the size and number of speakers you've connected (page 40). · Crossover Network­ Specify which frequencies will be sent to the subwoofer (page 41). · Channel Level ­ Adjust the overall balance of your speaker system (page 41). · Speaker Distance ­ Specify the distance of your speakers from the listening position (page 42). · THX Audio Setting ­ Specify the distance of your surround back speakers from each other (page 42). · THX Speaker Setup ­ Specify whether or not you have a THX speaker system (page 43). Checking your Acoustic Calibration EQ settings After you have completed an automatic or manual Acoustic Calibration EQ adjustment, you can check the ALL CH ADJUST, FRONT ALIGN and custom settings using the on-screen display. 1 Select `EQ Data Check' from the Manual MCACC setup menu. 3. Manual MCACC a. Fine Ch Level b. Fine SP Distance c. EQ Auto Setting d. EQ Data Copy e. EQ CUSTOM1 Adjust f . EQ CUSTOM2 Adjust g. EQ Data Check :Return 3g. EQ Data Check ALL CH ADJUST [ Left ] 40Hz 125Hz 250Hz 4kHz 13kHz TRIM : + 1. 0dB : 0. 0dB : 0. 0dB : 0. 0dB : 0. 0dB : 0. 0dB :Return 2 Select the setting you want to check. · It is useful to do this while a source is playing so you can compare the different settings. 3 Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen. 3 Select the channels you want, pressing ENTER when you're finished checking each one. 4 When you're finished, press RETURN. You return to the Manual MCACC setup menu. Speaker Setting Use this setting to specify your speaker configuration (size, number of speakers). It is a good idea to make sure that the settings made in Automatically setting up for surround sound (MCACC) on page 8 are correct. 1 Select `Speaker Setting' from the Manual SP Setup menu. 4. Manual SP Setup a. Speaker Setting b. Crossover Network c. Channel Level d. Speaker Distance e. THX Audio Setting f. THX Speaker Setup 4a. Speaker Setting Front SMALL Center [ SMALL ] Surr [ SMALL ] SB [ SMALL x2 ] SUB W. YES Manual speaker setup This receiver allows you to make detailed settings to optimize the surround sound performance. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers. ). These settings are designed to fine-tune your system, but if you're satisfied with the settings made in Automatically setting up for surround sound (MCACC) on page 8, it isn't necessary to make all of these settings. Caution · The test tones used in the System Setup are output at high volume. :Return [ THX : ALL SMALL ] :Finish 2 Choose the set of speakers that you want to set then select a speaker size. Use / to select the size (and number) of each of the following speakers: · Front ­ Select LARGE if your front speakers reproduce bass frequencies effectively, or if you didn't connect a subwoofer. [. . . ] · When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. · Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surface. 70 En Pioneer Authorized Distributors REP. OF SOUTH AFRICA AFRICATEK (PTY) LTD. 29 Heronmere Road, Reuven Booysens. Johannesburg 2091 P. O. Box 121 Linmeyer 2105 TEL: 490 9202 THAILAND PIONEER ELECTRONICS (THAILAND) CO. , LTD. FL. [. . . ]