User manual PIONEER VSX-531B

[. . . ] connect speakers with 6 h to 16 h impedance. Match the + and - terminals on this unit with the + and - terminals on the speakers when connecting. After all connections are complete, make speaker settings in “Automatic Speaker Setting (MCACC) ( 12)”. En Make sure the exposed wires of the speakers do not stick out of the speaker terminals when connecting. [. . . ] Please refer to the TV's operation manual for directions on connections and setup for the TV. Standby Through When the receiver is in standby, the HDMI input signal selected here will be output to the TV by HDMI. OFF: Signal will not be output during standby. 0 Test tones are emitted by the speakers, and firstly the unit detects the speakers connected and the noise in the environment. After the results of the above measurements are displayed, the test tones are emitted again, and the unit automatically makes settings such as the optimum volume level and the crossover frequency. The Home Menu is displayed once all the settings are complete. 12 SN29402357_VSX-531_QSG_EnFrEs_151215. Book 13 ページ ２０１５年１２月１５日　火曜日　午後３時５０分 Playback Basic Playback Listening To the Radio 1. Press BAND (b) several times to select either AM or FM. Press and hold TUNEi or TUNEj (c) for about a second to start automatic tuning to a radio station. Tune into the AM/FM radio station you want to register. Press EDIT (d) so that the preset number on the display flashes. Press PRESETi or PRESETj (e) to select a number between 1 and 30 while the preset number is flashing. Switch the input on the TV to that assigned to the unit. Press INPUT SELECTOR (a) on the remote control with the same name as the jack to which you connected the player to switch the input. Use VOLUME i/j (b) to adjust the volume. 0 You can switch the audio to suit the connected cable. Book 14 ページ ２０１５年１２月１５日　火曜日　午後３時５０分 BLUETOOTH® Playback About Listening Modes The default setting is for the EXT. a En b c b d e f c 13 SN29402357_VSX-531_QSG_EnFrEs_151215. A You can wirelessly enjoy music files stored in a smartphone or other BLUETOOTH-enabled device. The coverage area is about 33 feet (10 meters). 0 Note that connection is not always guaranteed with all BLUETOOTH-enabled devices. [. . . ] If so, re-attach the speaker wires, making sure there are no stray strands. - When Auto Power Down is set, the power automatically turns off at the set time. En You can also see which audio format is being input by checking the indicators in the lower part of the display. This unit is compatible with the following digital audio formats. [. . . ]