User manual PIONEER VSX-817-SK

[. . . ] AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-517-S/-K VSX-817-S/-K Operating Instructions IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_En-A NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Adjust the effect from 0 (all center channel sent to front right and left speakers) to 10 (center channel sent to the center speaker only). Sets the effect level for the currently selected Advanced Surround mode (each mode can be set separately). 10 to 90 Deutsch CD AUTO SURR CD-R FM AM CD FM STEREO/ AM RECEIVER STEREO/ F. S. SURR STANDARD ADV. SURR AUTO SURR F. S. SURR STANDARD ADV. SURR ACOUSTIC DIALOG EQ SOUND RETRIEVER TOP MENU Effect S. RETRIEVER MENU PHASE Above: VSX-517 (left) and VSX-817 (right) Français a Only available with 2 ch sources in Dolby Pro Logic IIx Music (VSX-817 model only)/Dolby Pro Logic II Music mode. b VSX-817 model only ­ Only available with 2 ch sources in Neo:6 Music mode. Listening in stereo When you select STEREO you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings). Dolby Digital and DTS multichannel sources are downmixed to stereo. CD-R/TAPE · While listening to a source, press STEREO/F. S. SURR to select Front Stage Surround Advance modes. · STEREO ­ See Listening in stereo above for more on this. · F. S. S. FOCUS ­ Use to provide a rich surround sound effect directed to the center of where the front left and right speakers sound projection area converges. WIDE ­ Use to provide a surround sound effect to a wider area than FOCUS mode. 1 FOCUS position (Recommend) Front left speaker Front right speaker WIDE position Front left speaker Front right speaker Italiano Nederlands CD AUTO SURR CD-R FM AM CD FM STEREO/ AM RECEIVER STEREO/ F. S. SURR STANDARD ADV. SURR AUTO SURR F. S. SURR STANDARD ADV. SURR ACOUSTIC DIALOG EQ SOUND RETRIEVER Español TOP MENU S RETRIEVER MENU PHASE Above: VSX-517 (left) and VSX-817 (right) · While listening to a source, press STEREO/F. S. SURR for stereo playback. Press repeatedly to switch between: · STEREO ­ The audio is heard with your surround settings and you can still use the Midnight, Loudness, and Tone functions. · F. S. S. FOCUS ­ See Using Front Stage Surround Advance below for more on this. WIDE ­ See Using Front Stage Surround Advance below for more on this. Note 1 · VSX-517 model ­ When using F. S. S. WIDE, a better effect can be obtained if Quick Setup is performed (see Using the Quick Setup on page 9). · VSX-817 model ­ When using F. S. S. WIDE, a better effect can be obtained if Auto MCACC Setup is performed. For more on this, refer to Automatically setting up for surround sound (MCACC) on page 10. 33 En 05 Listening to your system Using Stream Direct Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unnecessary signal processing is bypassed. CD-R/TAPE CD AUTO SURR CD-R FM AM CD FM STEREO/ AM RECEIVER STEREO/ F. S. SURR STANDARD ADV. SURR AUTO SURR F. S. SURR STANDARD ADV. SURR ACOUSTIC DIALOG EQ SOUND RETRIEVER TOP MENU S. RETRIEVER MENU PHASE Above: VSX-517 (left) and VSX-817 (right) · While listening to a source, press AUTO SURR to select Stream Direct mode. · AUTOSURR. · DIRECT ­ Sources are heard according to the settings made in the Surround Setup (speaker setting, channel level, speaker distance), as well as with dual mono, Center Width, Dimension and Panorama settings. You will hear sources according to the number of channels in the signal. For analog sources, only Channel Level can be set. All other digital processing can not be set. · While listening to a source, press (SHIFT +) ACOUSTIC EQ. Press repeatedly to select between: · ALL CH ­ No special weighting is given to any one channel. ALIGN ­ All speakers are heard in accordance with the front speaker settings. [. . . ] . AC 110 V/AC 120 V to 127 V/ AC 220 V/AC 230 V to 240 V, 50 Hz/60 Hz Silver model Australia model . AC 230 V to 240 V, 50 Hz All other models . AC 110 V/AC 120 V to 127 V/ AC 220 V/AC 230 to 240 V, 50 Hz/60 Hz Power consumption VSX-517 . 0. 5 W (AC 220 V/50 Hz) Dimensions VSX-517 . [. . . ]