User manual PIONEER VSX-832

[. . . ] 0 The power cord must be connected only after all other cable connections are completed. 0 We will not accept responsibility for damage arising from the connection of equipment manufactured by other companies. 0 Connect speakers with 4 ≠ to 16 ≠ impedance. Furthermore, available services may vary depending on your area of residence. [. . . ] You can enjoy sound of the HDMI connected ARC compatible TV through the speakers connected to the unit. to use this function , set "HDMI CEC" to "On" in advance. "Auto": To enjoy the TV sound through the speakers connected to this unit "Off": When not using the ARC function This setting automatically corrects any desynchronization between the video and audio signals based on data from the HDMI LipSync compatible TV. Auto Standby This setting places the unit on standby automatically after 20 minutes of inactivity without any video or audio input. (When "USB Power Out at Standby" or "Network Standby" is on, this becomes the HYBRID STANDBY mode which reduces the increase in power consumption to a minimum. ) "On": The unit will automatically enter standby mode. "AUTO STBY" lights on the display. "Off": The unit will not automatically enter standby mode. 0 "Auto Standby" is displayed on the display and TV screen 30 seconds before the Auto Standby comes on. 0 This setting cannot be set to "On" if "Auto Standby" and "HDMI" - "HDMI Standby Through" are set to "Off". Devices connected to the USB port are supplied with electricity even when this unit is in standby mode when this function is "On". (Default Value is "Off") 0 When using this feature, power consumption increases even when this unit is on standby, however, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only essential circuits are operating. Auto Standby in HDMI Standby Through Audio Return Channel USB Power Out at Standby Auto Delay ∫ Power Management Sleep Timer Allows the unit to enter standby automatically when the specified time elapses. select "30 minutes" , "60 minutes" , or "90 minutes". "Off (default value)": Does not turn the unit to standby automatically. 52 > Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Network Standby When this feature is turned "On (default value)", you can turn on the power of the unit via the network using an application that can control this unit. 0 When using "Network Standby", power consumption increases even when this unit is on standby, however, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only essential circuits are operating. 0 When the connection to the network is lost, "Network Standby" is disabled to reduce power consumption. Use the power button on the remote controller or main unit to turn the unit on if this happens. This function wakes up the unit on standby by connecting a BLUETOOTH wireless technology enabled device. "On": When this function is to be used "Off (default value)": When this function is not to be used 0 When this setting is turned "On", power consumption increases even when this unit is on standby, however, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only essential circuits are operating. 0 The setting is fixed to "Off" if "Network/Bluetooth" - "Bluetooth" - "Auto Input Change" is set to "Off". [. . . ] ˆ Ström Kan inte slå på enheten 0 Se till att nätkabeln är ordentligt ansluten till vägguttaget. Video och ljud är inte synkroniserade 0 Video kan fördröjas i förhållande till ljudet beroende på inställningarna och anslutningarna till din tv. 0 Försök med att sätta i/dra ur strömförsörjningen till den 72 > Innan du börjar > Delarnas namn > Installera > Grundinställning > Uppspelning Avancerade inställningar | Ytterligare information | Övrigt ändrats till manuell. 0, 5 V/500 mA) Etherne: 1 Mikrofoninställning: 1 (Front) Strömförbrukning i standby-läge I följande fall kan strömförbrukningen i standby-läge nå upp till maximalt 12 W: – När "Network Standby" är inställd på "On" – När "HDMI CEC" är inställd på "On" – När "HDMI Standby Through" är inställt på något annat än "Off" – När "Bluetooth Wakeup" är inställd på "On" – När "USB Power Out at Standby" är inställd på "On" Videoingångar Komposit IN1 (BD/DVD), IN2 (CBL/SAT) Kompatibla ingångsupplösningar HDMI-ingång 4K, 1080p/24, 1080p, 1080i, 720p, 480p/576p Kompositingång 480i/576i 0 Utmatningen från HDMI OUT-uttaget till tv:n har samma upplösning som ingången. [. . . ]