User manual PIONEER X-HM20DAB-S

[. . . ] X-HM10DAB-S X-HM20DAB-K CD Receiver System Discover the benefits of registering your product online at http://www. pioneer. co. uk (or http://www. pioneer. eu). Operating Instructions WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. D3-4-2-1-3_A1_En Operating Environment Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light) D3-4-2-1-7c*_A1_En WARNING Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. [. . . ] Playback will start File name display Counter display Album display and the file name will be displayed. l Title, Artist and Album name are displayed if they are recorded in the USB memory device. l Display content can be changed by pressing the CD/ USB DISPLAY button. Note: To pause playback: Press the / (CD/USB / ) button. Note: If "Not Support" is displayed, it means "Copyright protected WMA file" or "Not supported playback file" is selected. En-16 Listening to USB mass storage device/MP3 player (continued) n To play back USB/MP3 player with folder mode on button repeatedly on main unit to select USB function. Connect the USB memory device that has MP3/WMA format files on the unit. When the USB memory is connected to the main unit, the device information will be displayed. or ) button to select desired playback folder. To start playback with folder mode on, go to step 4. To change the playback folder, press the PRESET ( or ) button to select another folder. or button. 1 Press the USB button on the remote control or INPUT 2 Press the FOLDER button, and press the PRESET ( l This product can play WMA and MP3 files. It will automatically detect the file type being played. If unplayable file is played on this product, "Not Support" is indicated and the file will be automatically skipped. If abnormal indications appear on the display due to the unspecified file, turn off the unit and then turn it on again. l This product relates to USB mass storage devices and MP3 players. It may however face some irregularities due to various unforeseen reasons from some devices. Should this happen, turn off the unit and then turn it on again. l The USB port is only intended for direct connection to a USB memory device without any cable. l During CD function, MP3 player will not be charging. l "Not support" will be displayed if you connect an iPod to USB terminal when the USB function is selected. 3 Select desired file to be played back by pressing the 4 Press the / (CD/USB / ) button. Playback will start and the file name will be displayed. l Title, Artist and Album name are displayed if they are recorded in the USB memory device. l Display content can be changed by pressing the CD/ USB DISPLAY button. Advanced USB playback The following functions are the same as CD operations: Page Direct track search . . 15 Notes: l If USB memory device is not connected, "USB No Media" will be shown on the display. [. . . ] If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit again, and then turn the power on. Note: If neither operation above restores the unit, clear all the memory by resetting it. Maintenance n Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. Caution: l Do not use chemicals for cleaning (petrol, paint thinner, etc. ). [. . . ]