User manual PIONEER X-SMC5-S

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 10 cm at top, 10 cm at rear, and 10 cm at each side). Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. [. . . ] When Auto is selected, the network type is automatically switched between Wired and Wireless. It is depending on the occasion when the unit is powered on. The name of this system displayed on a computer or other device connected to the network can be changed. What it does Use this to set the Bluetooth PIN code. (page 20) When On is selected, the volume can be set between 0 to 30. Each time this setting has been changed, the volume becomes to 0. You can set up the password from Change Password. (page 39) When Power Save mode is selected, the unit will be automatically in the standby mode if no operation has done for more than 30 minutes. When Demo Mode is selected, the demonstration screen will start if no operation has done for more than 5 minutes. change the language of the operation messages displayed on the main display. Other languages: French, German, Netherlands, Italian, Spanish, Russian, Japanese When this is set to On, the time required for bootup will be shortened. in addition , power-on will occur simultaneously when AirPlay is performed. Note, however, that when Quick Start Mode is set to On, the electrical current consumed in the power-off (standby) mode will be about the same as that required when the power is turned on. Also, if the power cord is disconnected while Quick Start Mode is set to On, the next time the plug is reconnected, about one minute warm-up will be required before the unit responds. Wait for one minute after reconnecting the cord before pressing STANDBY/ON. Use this to check unit information details. Use ///to select the item, then press ENTER. Use ///to change the setting, then press ENTER. The factory default settings are indicated in italic. important · The following settings are applicable to DVD/CD input; they are disabled when other inputs are selected. Settings Equalizer (Off/Rock/Pop/Live/Dance/ Techno/Classic/Soft) Audio DRC (High/Medium/Low/Off ) What it does Select according to the genre of music to be listened to. This makes loud sounds weaker and weak sounds louder. [. . . ] ⷠMovie or Photo files cannot be played back. ⷠThere are cases where you cannot listen to an Internet radio station even if the station can be selected from a list of radio stations. ⷠSome functions may not be supported depending on the server type or version used. As such, files not supported by your server are not displayed on this unit. [. . . ]