User manual PIONEER XD-J220

[. . . ] In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same. If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. [. . . ] The contents displayed differ according to the resolution of your computer's monitor. The contents displayed on the screen can be changed using the procedure below. Double-click the deck's track information display section (the part where the track name, BPM, etc. , are displayed): Opens and closes the track information display section. Turn the rotary selector while pressing the [TREE] button: Moves the cursor in the [TREE] area. The section marked 1 on the above screen is called the [TREE] area. The section marked 2 on the above screen is called the [TRACK] area. The [TREE] area, [TRACK] area and [FAVORITES] area are collectively called the [BROWSE] area. Turn the rotary selector while pressing the [SHIFT] button: Moves the cursor in the [TRACK] area page by page. Turn the rotary selector while pressing the [FAVORITES (REC)] button: Moves the cursor in the [FAVORITES] area. The section marked 3 on the above screen is called the [FAVORITES] area. -- The sound at the position at which the [NEEDLE SEARCH] pad is touched can easily be played. When the [FUNCTION] is on: The desired function can be assigned. Deck on left side of this unit: Deck [A] or [C] !Turn counterclockwise while filter function is on: Low pass filter. Turn clockwise while filter function is on: High pass filter. MOVE PANEL operation [MOVE MODE] (the loop moving mode) switches each time the [MODE DELETE] button is pressed. Use the [c BWD/FWD d] buttons to move the playback position or loop by the amount of movement set with the [SIZE c/d] buttons. HOT CUE PANEL operation When a button at which nothing is set is pressed in the play or pause mode, a hot cue ([1] ­ [4]) is set at the position at which the button was pressed. When a button at which a hot cue ([1] ­ [4]) is set is pressed in the play or pause mode, a hot cue ([1] ­ [4]) is called out. to cancel a hot cue ([1] ­ [4]) , press the corresponding button ([1] ­ [4]) while pressing the [DELETE] button. Buttons [1] ­ [4] at which hot cues are set flash while the [DELETE] button is pressed. [. . . ] (page 21) Double-click the track information display section (the part where the track name, BPM, etc. The [Advanced] mode cannot be selected with TRAKTOR Pioneer XD-J220 EDITION. The effect panel can be switched to the [Advanced] mode when you upgrade to TRAKTOR PRO or TRAKTOR SCRATCH PRO. Sound is interrupted when the ASIO driver is set. [. . . ]