User manual PIONEER XR-A670 annexe 1

[. . . ] This system is designed to use minimal electricity whenpower is switched OFF (during Standby). This product complies with the Low Voltage Directive (73/23/ EEC), EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This product contains a laser diode of higher class than 1. [. . . ] The DISC CHANGE button and DISC select buttons are deactivated when no disc is loaded in the tray. The disc display indicator will light when a disc is loaded, and go off when a disc is not loaded. NOTE: If you leave discs in the tray, the position of the discs (1, 2 & 3) don't change even after the power is switched off. To search for a particular track To search for the beginning of a track NOTE: The volume drops automatically during forward or backward search operations. You can also use the REPEAT button on the main unit for the same purpose (On the XR-A370 only). A Selecting a different disc during play The track being played is stopped and the first track on the selected disc will be played. Repeat play of a single track or of all the tracks on 3 discs. Each time you press it, the repeat mode changes as follows: If the OPEN/CLOSE button is pressed during repeat playback to open the tray, the repeat playback is canceled. C To play all discs and all tracks in random order (Random playback) In either play or stop mode, press the RDM button on the remote control unit to have the unit play all tracks on all the discs loaded in random order. Random playback stops after it's played all tracks once. Pressing the RPT button ( " RPT " appears) during random playback starts random playback of all of the 3 discs repeatedly. (Random repeat) ÷ When you search for a track by pressing the DISC select buttons (1, 2 or 3) or the DISC CHANGE button, the random playback is canceled and normal playback resumes. It is not possible to randomly play programmed tracks. (Pressing the RDM button during program playback cancels program playback and starts random playback. ) ÷ When the OPEN/CLOSE button is pressed during random playback, the random playback is canceled and normal playback resumes. Disc 1 will move to the play position but playback will not start. For example) To play the third track in the program, press To play the twentieth track in the program, press Repeat steps 3, to program all desired tracks from DISC 1. After programming track from DISC 2, press the DISC 3 select button. Start playback, and programmed tracks are played one after another in the programmed order. Each time the CLEAR button [ ] on the remote control is pressed, the last programmed step will be cleared. Tapes may be played back in TAPE I or TAPE II but not in both decks at the same time. The XR-A370 can play/record only TYPE I (Normal) tapes. [. . . ] First put the tape deck in play mode then press the fast forward or rewind button. Load a disc correctly with the label side (printed side) UP. Move the unit away from the fluorescent light (refer to P. The blank interval between two songs is shorter than 4 seconds. [. . . ]