User manual PIONEER XSMC00

[. . . ] To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. d3-4-2-1-3_A1_En This product is for general household purposes. Any failure due to use for other than household purposes (such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period. K041_A1_En CAUTION WARNING To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment. [. . . ] € If you press the STANDBY/ON to enter the standby mode or change the function from CD to another, the programmed selections will be cleared. € During the program operation, random play is not possible. FILE 9 FILE 10 FOLDER B (FOLDER 3) FILE 1 FILE 2 20 En Disc playback 06 Specify the folder to play To specify the folder to play, perform the following steps. sTANDBY/ON OPEN/CLOSE Switch the display contents 1 Press DISPLAY. 0 English  CD iPod USB BT AUDIO  TUNER CLOCK/TIMER DISPLAY TUNE+ FOLDER AUDIO IN SLEEP If the title, artist and album name has been written to the file, that information will be displayed. ) Number of track, playback time display Title/Artist/Album display ENTER EQUALIZER Français 1 4 7 CLEAR 2 5 8 0 3 P. BASS MENU MEMORY /PROGRAM 6 BASS/TREBLE PRESET TUNE– VOLUME 9 REPEAT + MUTE + – DIMMER   RANDOM  File type display  –  Number of folder/track display DISPLAY TUNE+ FOLDER  ST/MONO RDS ASPM Note PTY DISPLAY Español 1 Press CD, and load an MP3/WMA disc. Playback will start from the first song of the selected folder. • Even if it is stopped , it is possible to press , to select a folder. € “Copyright protected WMA files” or “Unsupported files” cannot be played back. In these case the files will be skipped automatically. € There may be cases where no information can be displayed. € Displaying title, artist and album name is only supported for MP3 files. 21 En 07 USB playback Chapter 7: USB playback Repeat play Playing USB storage devices It is possible to listen to two-channel audio using the USB interface on the front of this receiver. € Pioneer does not guarantee that any file recorded on a USB storage device will play or that power will be supplied to a USB storage device. Also note that Pioneer will accept no responsibility whatsoever for loss of files on USB storage devices caused by connection to this unit. Repeat play can play one track, all tracks or a programmed sequence continuously. To repeat one track: Press REPEAT repeatedly until “RPT ONE” appears. To repeat all tracks: Press REPEAT repeatedly until “RPT ALL” appears. To repeat desired tracks: Perform steps 1 to 5 in “Programmed play (CD or MP3/WMA)” section on next page and then press REPEAT repeatedly until “RPT ALL” appears. The number of folders or files stored on the connected USB storage device appear on the main display automatically. • This receiver does not support a USB hub. [. . . ] Restoring all the settings to the defaults Use the steps below to restore the all settings to their defaults. 1 Press STANDBY/ON to turn the power on. 2 Press CD on the remote control or INPUT repeatedly on the main unit to select CD input. Use the buttons on this unit’s top panel. [. . . ]