User manual PIONEER XV-DV940

[. . . ] RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated Òdangerous voltageÓ within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. READ INSTRUCTIONS -- All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for future reference. hEED WARNINGS -- All warnings on the product and in the operating instructions should be adhered to. [. . . ] 5 To insert a step in the middle of the program list, highlight the step where you want the new step to appear, then select a title/chapter/group/folder/track to add. After pressing ENTER, the new step is inserted into the list. Playback Stop ­ Turns off program play, but does not erase the program list · Program Delete ­ Erases the program list and turns off program play Program play remains active until you press (stop), clear the playlist (see below), eject the disc or switch off the player. When you load a disc with a saved program list, program play is automatically turned on. You can save program lists for up to 24 discs. After that, the oldest one is replaced with the new one saved. You must clear the program list to program a new one. You can search DVD-Video discs by title or chapter number, or by time. DVD-Audio discs can be searched by group or track, or by page. SACDs, CDs can be searched by track number, and Video CDs by track number or time. MP3 discs can be searched by folder or track number. The screen below shows the DVD-Video search options. Using the unit display Even though the OSD is available for SACDs, CDs and MP3 discs, the Display unit provides enough information to make a program list easily. You're prompted to enter a track or folder for the first step in the program list. 2 Use / (cursor up/down) to select a track or a folder, then press ENTER. For MP3 discs only: To select an individual track within a folder, use the / (cursor up/down) buttons to select the folder, then press , then use / (cursor up/ down) to select a track. Wait for the display to prompt you after completing each selection. If you make a mistake, press CLR to delete the last (most recently) programmed track. 3 Repeat step 2 to build up a program list. 4 Use the number buttons to enter a title, group, chapter, folder or track number, or a time or a page. Some DVD-Audio discs have an extra `bonus' group that requires a 4-digit key number to access. see the disc packaging for details and the key number. [. . . ] The most common system of encoding digital audio, found on CDs and DAT. These associate discs and players with particular areas of the world. This system will only play discs that have compatible region codes. You can find the region code of your system by looking on the rear panel. [. . . ]