User manual PIONEER XW-NAS3 -

[. . . ] RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light) Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. [. . . ] 1 When the Bluetooth ADAPTER is not plugged in the ADAPTER PORT, Bluetooth ADAPTER input mode cannot be selected even if INPUT is pressed. Merely by connecting your iPod to this speaker system, you can enjoy high-quality digital sound direct from your iPod. These speakers can also be connected to a television set, letting you view images from your iPod. Playback and volume level setting for iPod music and images can be performed from this unit or the iPod itself. tip · When using an iPod not supported by this unit, use a commercially available cable to connect the iPod to the AUDIO IN connector of this unit. Connecting your iPod Confirm what iPod models are supported This system is compatible with the audio and video of the iPod nano third generation and above, iPod classic, iPod touch and iPhone. You can confirm your software version by operating your iPod as follows: 1 Select `Settings' from the top menu. To prevent damage when connecting an iPod, always use the Dock adaptor supplied with your iPod, or a commercially purchased Dock adaptor designed for your iPod model. Consult the Apple website regarding the newest software versions and instructions on how to update your version. Some functions may be restricted depending on the model or software version. Features such as the equalizer cannot be controlled using this system, and we recommend switching the equalizer off before connecting. ⷠPioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any inconvenience or loss of recorded material resulting from the iPod failure. ⷠWhen connecting an iPod, use the `Speaker' menu's `Backlight' item to set the iPod's backlight function. This does not apply to iPod touch and iPhone. An iPod Dock adaptor is not supplied with this unit. When attaching the Dock adaptor, be sure to orient the front-back directions of the Dock adaptor correctly. To attach, first place the protruding tabs on the front side of the adaptor into the depressions on the iPod connector port and press into position. When attaching the adaptor, be careful not to strike the connectors. To watch iPod images on a television, perform connections using either a composite video cable or component video cable. ⷠWhen using a component video cable for connections, it is necessary to adjust the unit's video output. When an iPod is connected to this unit, the iPod's TV output setting is automatically set to ON. While connected, the iPod can be used to switch the TV output setting. [. . . ] ⷠIf the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions. remedy · Disconnect the power plug from the outlet, and insert again. ⷠIf the power shuts off automatically, take the unit to your nearest Pioneer authorized service center or your dealer for servicing. When input is set to iPod, if no iPod is connected for one hour or more, standby without user action. [. . . ]