User manual PIONEER XW-NAS5 -

[. . . ] RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light) Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. [. . . ] What it does Starts normal playback and pauses/ unpauses playback. When your iPod is connected to this unit and you wish to operate the iPod by touching it directly, be sure to hold the iPod steady with the other hand to prevent malfunctions due to faulty contacts. When an iPod is connected to this unit, will flash while the unit confirms the iPod connection and retrieves data from the iPod. When INPUT is pressed to change the input to iPod, the connection is completed and will light steadily. ) can be used to listen to music wirelessly. 1 Also, by using a commercially available transmitter supporting Bluetooth wireless technology, you can listen to music on a device not equipped with Bluetooth wireless technology. The AS-BT100 model supports SCMS-T contents protection, so music can also be enjoyed on devices equipped with SCMS-T type Bluetooth wireless technology. Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. The remote control supplied with this unit allows you to play and stop media, and perform other operations. It must be necessary that the Bluetooth wireless technology enabled device supports A2DP profiles. Pioneer does not guarantee proper connection and operation of this unit with all Bluetooth wireless technology enabled devices. 2 · It must be necessary that the Bluetooth wireless technology enabled device supports AVRCP profiles. "Pairing" must be done before you start playback of Bluetooth wireless technology content using Bluetooth ADAPTER. Make sure to perform pairing first time you operate the system or any time pairing data is cleared. "Pairing" is the step necessary to register Bluetooth wireless technology device to enable Bluetooth communications. 2 For more details, see also the operating instructions of your Bluetooth wireless technology device. 3 Press INPUT to switch the unit to ` When pairing has not been performed, ` ' is displayed. ` ' will flash, and the unit will enter the pairing standby mode. 2 Switch on the Bluetooth wireless technology device that you want to make pairing, place it near the system and set it into the pairing mode. Lights when Bluetooth wireless technology device is not connected. In this case, perform the connection operation from the side of the Bluetooth wireless technology device. Repeat step 2 until the PIN code is reset to the value desired. [. . . ] When input is set to iPod, if no iPod is connected for one hour or to standby without user action. More, the unit's power automatically turns OFF. No sound is output when a function is selected. Operate within 7 m, 30° of the remote sensor on the front panel (refer to page 6). [. . . ]