User manual PIONEER XW-NAV1-K -

[. . . ] Receive free tips, updates and service bulletins on your new product · improve product development Your input helps us continue to design products that meet your needs. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The tuner can receive FM broadcasts, and lets you memorize your favorite stations so you don't have to manually tune in every time you want to listen. There are two ways to do this: Automatic tuning - To search for stations, press and hold TUNE +/­ for about a few second. This unit will start searching for the next station, stopping when it has found one. 3 Press number button (1 to 9) for three seconds. Auto tuning stops automatically after the FM band is finished, or after the limit of 9 presets has been reached. You can save up to 9 station presets so that you always have easy access to your favorite stations without having to tune in manually each time. 1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit. 2 When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will be overwritten with the new one. Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. If the AUX IN mini-plug jack is connected to auxiliary phones jack, this unit's volume will be changed by the playback component's volume. If the sound is distorted after you lower this unit's volume, try lowering the auxiliary playback component's volume. This unit can not transfer the external input's sound from the HDMI OUT terminal. This method can be used to play music on this unit from iPod/iPhones that do not support use of an iPod Dock. When the AUX input is selected, ` ' is displayed on the front panel display. The factory default settings are indicated in italic. In the USB mode, you can only change the Play Mode and Audio Settings on the HOME MENU screen. The sound of a WMA or MP3 file is played with high sound quality. This is only valid for files with the extension ". Try different settings, and choose the one providing the good effect. Select according to the genre of music to be listened to. This makes loud sounds weaker and weak sounds louder. Change the setting for example when watching movies late at night. [. . . ] Doing so could warp discs, making it impossible to play them. Them, and the label's glue may have oozed out. Check that there is no glue around the edges of such labels before using rented discs. Do not attempt to play such discs, as they could damage this unit. [. . . ]