User manual PIONEER XW-NAW1-K

[. . . ] To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed. Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e. [. . . ] Wall mounting XW-NAW1-K to a wall XW-NAW1-K is can be mounted on a wall if desired. Before performing a wall mounting, complete the wiring connections. caution · RememberthatXW-NAW1-Kisheavyandthatitsweightcould cause the screws to work loose, or the wall material to fail to support it, resulting in XW-NAW1-K falling. Usescrewssuitableforwall material and support the weight of XW-NAW1-K. Once you've found a place for your XW-NAW1-K, you're just a step or two away from experiencing the music from your iPod like you've never heard it before. All you have to do is insert any iPod with 30-pin dock connector into the universal dock of the XW-NAW1-K. Then plug the XW-NAW1-K in, turn it on, and enjoy! the XW-NAW1-K offers other usage options as well. You can use it to listen to other audio sources or send the video from your iPod to a display. Insert the cable of the AC adapter into the DC IN jack on the bottom of the XWNAW1-K. Plug the AC adapter into a wall outlet or surge protector. Caution Do not insert the power plug in the wall outlet without attaching it to the AC adapter. ⷠAshortcircuitmayresultifa metal piece gets in the space between the electrodes or an electric shock may result when pulled out from the outlet. Confirm what iPod models are supported This system is compatible with the audio and video of the iPod nano third generation and above, iPod classic, iPod touch and iPhone. Push the front of the XW-NAW1K's dock. Find the insert that goes with your iPod model (or use the insert that came with your iPod). The models compatible with each insert are listed in one of the corners on the top of the insert. gently place the insert over the 30-pin dock. The back of the insert should rest on the ridge just behind the dock on the XW-NAW1-K. Place the dock connector on your iPod onto the XW-NAW1-K dock. Push down gently until the iPod rests firmly in the insert and on the dock. Also brings a docked iPod out of sleep mode when the XW-NAW1-K turns on. [. . . ] ⷠMake sure that there is a clear path between the remote control and the remote sensor on the unit, and make sure that you are pointing the remote control directly at the remote sensor on the unit. If not inserted properly, realign the battery to fit securely into the compartment. If you still cannot operate the docked iPod with the remote control, make sure the remote control operates the other speaker system functions (volume, power). If it does not control these functions, replace the battery in the remote control with a new battery. [. . . ]