User manual PITSOS B97991X

[. . . ] Only after read ing these will you be able to operate the appliance correctly. Please keep the use and installation instructions in a safe place. If the appliance is passed to another per son, please enclose the instructions. Before switching on your appliance Transport damage Check your appliance after removing the packaging. [. . . ] All hotplates are switched off The residual heat indicator remains lit until the hotplates have cooled sufficiently. The hob switches off automatically if all the hotplates have been switched off for more than 10 seconds. If there is still residual heat available when the hob is switched back on, H/h and - flash alternately in the hotplate indicator. To prevent children from switching on the hotplates, you can secure the hob against being switched on inadvertently. Switch off the hotplates one by one from right to Touch the main @ switch for at least 5 seconds, To switch on, touch the @ main switch for more than 4 seconds. during this time the § display flashes. As soon as the display goes out, the hob is switched on. You can deactivate the childproof lock again. You can lock the hob on a single occasion, if for example, small children are visiting: The hob must be switched off. Touch the @ main switch for more than 4 seconds. The § indicator lights up for 10 seconds and goes out. Touch the @ main switch for more than 4 seconds. The child proof locks could be activated or deactivated unintentionally when the appliance is cleaned using water or as a result of spillages or objects covering the main switch @. This section describes how to adjust the hotplates. The table shows the heat settings and cooking times for various dishes. The + and - control panels You can set the required heat setting using the + and - symbols. Touch the + or - symbol in the next 5 seconds. The basic setting will appear: + symbol = heat setting 1 - symbol = heat setting 9 Touch the + or - symbol until the desired heat setting appears. From power level j you can access more easily level k by touching the sensor +. The hotplate switches off and the residual heat indicator appears after approximately 5 seconds. The following table provides a few examples. The cooking time may vary depending on the type of food, its weight, and quality. [. . . ] Use the glass scraper to remove food residues and grease splashes. Use a cleaning product and kitchen towel to clean the surface when it is luke warm. If the surface is still too hot it can become stained. Wipe the surface and rub dry with a soft cloth. [. . . ]