User manual PITSOS WFP1200C7

[. . . ] General safety guidelines and warnings Removal and disposal of packaging Environmental protection / Saving energy Installing the appliance Removing the transport security devices Fixing the appliance Connecting to the water supply 4 4 5 5 5 6 6 7 7 8 9 10 10 Child safety device - depending on the model Detergents and additives First washing cycle Preparing the laundry for washing Loading the laundry Washing laundry End of wash programme/Removing the laun dry Cleaning / Maintenance / Frost protection Technical data Minor faults with simple solutions After Sales Service Consumption figures 16 17 18 19 19 p. 12 12 13 13 14 14 15 Water drainage Connecting to the electricity supply Getting to know your new appliance Programme selector Extra function and start buttons Screen 2 en 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 en 3 General safety guidelines and warnings This appliance complies with current safety standards in the sector. Points to bear in mind when washing clothes: !The appliance should only be used with cold water from the public water supply. The appliance should only be used for washing clothes suited to household washing machines. [. . . ] Close the door immediately after loading or emptying the drum. en 11 Child safety device - depending on the model (pic. 9) It is possible to avoid certain functions of the washing machine from accidentally being modified. With the child safety device activated, no modifications can be made to the current wash, and the " appears if someone attempts to modify the selected programme. If the machine is turned off and on again, the running programme will restart where it was interrupted. Turning on the child safety device m Set the programme selector control to the desired programme. m Put the laundry in the machine and close the door. Press the M button and hold it down (approximately 4 seconds) until the " symbol appears, after which " appears for a few moments (depending on the model). The child safety device is activated and the " symbol appears. The screen shows the time remaining and the " symbol throughout the washing cycle. If an attempt is made to modify the running programme, the child safety device guarantees that the washing machine continues with the programme you had selected. Then the screen only shows the " symbol. Turning off the child safety device To make any alterations to programmes and to end programmes with the " (without final spin) option, the child safety device must first be deactivated. m Press the M button and hold it down (approximately 4 seconds) until the " goes out. Detergents and additives All standard use detergents for automatic washing machines can be used. Do not use detergents with solvents in the washing machine!Do not use additives, cleaning sprays or stain removers in the vicinity of the appliance, as they may damage it. Keep detergents and additives in a safe place, away from children. Amount of detergent Only using the correct measure of detergent will guarantee good wash results. Note the manufacturer's recommendations. 12 en First washing cycle Carry out the first wash without any laundry in the machine to remove residual water left from test ing the machine at the factory. m Pour approximately two litres of water and half a measuring glass of normal detergent into compartment II of the detergent drawer. m Turn the programme selector to + and the tem perature to 90 C. The M-Q and M indicators come on per manently. m The B-m light flashes when the pro gramme has ended. The M indi cator goes out, and the screen shows ". [. . . ] Measure out the detergent in line with the manufacturer's instructions. Select the most suitable wash programme for the laundry. Disconnect the appliance for 5 10 minutes. To prevent the build-up of foam, put a dessertspoon of softener mixed with half a litre of water in the detergent drawer. [. . . ]