User manual PLANAR LA1710RTC Operations Manual

[. . . ] Disconnect the power plug from AC outlet if the product is not used for a long period of time. Don't: Do not touch the LCD panel surface with sharp or hard objects. Do not use abrasive cleaners, waxes or solvents for cleaning. Do not operate the product under the following conditions: - Extremely hot, cold or humid environment. [. . . ] Increases the brightness of the display image. Increases value of the adjustment items. Switches on/off the power of the LCD display. Green indicates the display is turned on. Amber indicates the display is in power-saving mode. Brightness Minus / Minus Brightness Plus / Plus Power Switch Power LED 10 How to Use the OSD Menus 1. Press the "Menu" button to pop up the on-screen menu and to select between the four main menus. Choose the adjustment items by pressing the "Select/Auto" button. Adjust the value of the adjustment items by pressing the " " button. 4. The OSD menu will automatically close, if you have left it idle for a pre-set time. 11 On-Screen Display Menus First OSD Menu: Auto-Adjustment Choose this function to obtain an optimum image. Contrast This function allows the user to adjust the image crispness. Contrast adjusts the difference between white and black shades. Horizontal Position Changes the horizontal position of the image. Vertical Position Changes the vertical position of the image. Brightness Adjusts the brightness of the image. Clock Changes the display data frequency to match the frequency of your graphic card. When you are experiencing vertical flickering bar, use this function to make an adjustment. Phase Synchronizes the signal timing of the display to that of the graphic card. When you are experiencing unstable to flickering image, use this function to make an adjustment. 12 On-Screen Display Menus Second OSD Menu: Display Mode Selects this function to view the display resolution, vertical refresh, and horizontal scan of the current mode. Offff-T OSD Off-Time Adjusts the time it takes for the OSD menu to disappear. Language Chooses the language you need. Sharpness Adjust the sharpness of the image. Reset Returns the display parameters of the current mode to the factory default settings. 13 On-Screen Display Menus Third OSD Menu: Volume It allows the sound volume. Mute It allows you to disable the sound immediately. Input Select It allows you the chosse the input signal. 14 On-Screen Display Menus Fourth OSD Menu: Color Adjusts the color temperature. Color Adjustment-Red Adjusts the red color of the display. Color Adjustment-Green Adjusts the green color of the display. Color Adjustment-Blue Adjusts the blue color of the display. 15 Appendix roubleshooting Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. Check that all the I/O and power connectors are correctly and well connected as described in the "Installation" section. Make sure the pins of the connectors are not crooked or broken. Problem: Partial image or incorrectly displayed the image. Check to see if the resolution of your computer is higher than that of the LCD display. Reconfigure the resolution of your computer to make it less than or equal to 1280 x 1024. Problem: Image has flickering vertical line bars. Use "Clock" to make an adjustment. Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display. Problem: Image is unstable and flickering Use "Phase" to make an adjustment. Problem: Image is scrolling Check and make sure the VGA signal cable (or adapter) is well connected. Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display. Problem: Vague image (characters and graphics) Use "Clock" to make an adjustment. [. . . ] See Optional MicroTouchTM USB HID Calibration Tool version 7. 00 Installation Process. Optional Driver MicroTouchTM Optional Driver MicroTouchTM USB HID Calibration Tool Version Installation for Resistive 7. 00 Installation Process for LA1710RTR: Resistive Touch Screen with USB Connection Please note: These monitors are Microsoft HID (Human Interface Device) compatible. The calibration driver is not required for general operation of the touch screen. This calibration tool is for optimization of touch performance for the touch screen to meet the 1% TPE accuracy specification. [. . . ]