User manual PLANAR LC1502R

[. . . ] LC1502R USER'S MANUAL www. planar. com 2 Table of Contents Usage Notice Safety and Use Precautions . 11 Brightness Control Automatic Brightness Control . 16 Specifications Electrical and Optical . 19 Safety and Regulatory Certifications . [. . . ] Alternatively, a power supply that is appropriately rated for the LC1502R is available from Planar. The supply is available with the AC power cord configured with either a European plug or a US plug. 12V Power Supply Kit, Euro type 12V Power Supply Kit, US type Input voltage Output voltage Rated Output Current Case Dimensions DC output cord length AC input power cord length 997-2825-xx 997-2826-xx 90-265 VAC, 47-63 Hz 12 VDC 6. 67A max 129 x 77 x 40 mm 1. 8 meters 1. 8 meters Power Adapter Power Cord 21 Cooling Kit For outdoor applications, a cooling kit may be desired to prevent excessive heating of the LCD display. In direct sunlight, the front surface of the display (the LCD cell) may reach temperatures well above the ambient temperature. Possible effects of extreme surface temperatures include: · LCD polarizer damage (permanent degraded image) · LCD fluid clearing (display unreadable) · Latent image (image burn-in visible) · Flicker (image jitter) · Localized non-uniformity (permanent spotty appearance). The cooling kit consists of a rear-mounted housing containing three fans and a front-mounted baffle that channels the air flow across the display surface. The fans' speed is governed by a temperature sensor adjacent to the photo sensor that is mounted on the front of the monitor. At temperatures above 30°C the fans will turn on at low speed and reach maximum speed at 40°C, thus minimizing the effects of sun loading and high temperatures. The total fan kit power consumption is approximately 3. 6 watts with fans at max speed. Fan power is derived from the 12V input (4-pin DIN connector. ) All cooling kit version monitors are shipped with the cooling kit pre-installed. Model LC1502R-C Planar Part Number 997-2823-xx Description LC1502R with cooling kit 22 Touch Screens The LC1502R is available with two different types of touch screen technology: near field imaging (NFI) and capacitive. Both come pre-installed; the touch screen itself is mounted to the front of the monitor and the touch screen controller module is mounted on the back. NFI technology utilizes a thick glass substrate that provides "vandal-proof" protection. Capacitive technology is more rugged than resistive, and is usually the touch screen of choice for heavy use, unattended environments. Contact Planar for additional details or other custom possibilities. Model LC1502RTC LC1502RTN Planar Part Number 997-2817-xx 997-2824-xx Description LC1502R with capacitive touch screen LC1502R with NFI touch screen and cooling kit NFI Touch Screen LC1502R with NFI Touch Screen and Cooling Kit The LC1502R with NFI touch screen and cooling kit ­ model LC1502RTN-C is designed to be embedded into kiosks installed in outdoor unsupervised environments. It includes a NFI "vandalproof" touch screen, neoprene weather seals, and a LCD surface cooling kit. The NFI touch controller is mounted to the back of the unit. The mounting bracket, bolted to each side of the unit, hooks onto the touch screen bezel, houses the touch screen and the seals which absorb shock and virtually eliminates the ingress of liquids. The monitor may easily be removed from the touch bezel for cleaning and maintenance. 23 Set up 1. Refer to Planar mechanical outline drawing 076-0596-xx for the recommended mounting pattern for this display. Separate the LCD monitor from the touch bezel for mounting. Remove the controller cover in order to remove the touch screen controller cable. [. . . ] Buyer must return Goods to Seller within 30 days of Seller's receipt of a warranty claim notice and only after receiving Seller's Return Goods Authorization. Seller shall, at its sole option, repair or replace the Goods. If Goods were repaired, altered or modified by persons other than Seller, this warranty is void. Conditions resulting from normal wear and tear and Buyer's failure to properly store, install, operate, handle or maintain the Goods are not within this warranty. [. . . ]