User manual PLANAR PE150M Product Manual

[. . . ] Monitor Stand LCD Screen The LCD monitor screen is a 15-inch TFT 1024 x 768 screen. LCD Monitor Control Panel Refer to Chapter 2 for details. 2 The LCD Monitor -- Rear View Figure 1-2: LCD Monitor Rear View 1. Audio Line-in (optional) AC Power Jack VGA Cable With 15-Pin D-Sub VGA Connector (Male) VESA interface: It can be mounted to VESA arm. (75mm pitch) Adjusting the Tilting Angle The LCD monitor's angle settings range from -5° to 25°. [. . . ] Selecting the user option lets you make individual adjustments to the R, G and B items. R, G and B: To make individual adjustments to the Red, Blue, Green (RGB) gain for the color temperature. Auto Level: To automatically adjust the white balance of the display. Exit: To exit the Graphic-Control submenu. 9 Graphic/Text Option The Graphic/Text option lets you switch between text and graphic display modes. Press the Adjustment button to switch between the text and graphic options. OSD Exit Option Use the OSD Exit item to close the OSD menu. The OSD will close by itself if left inactive. Note: 1. No Video When the monitor is ON and there is no Video signal received, the following message will be displayed. Signal out of monitor's supported range Then the frequency range of the signal is out of the monitor's specifications, the display will show messages in the following manner: The incoming frame rate is higher than 75Hz. In this case, the screen display may not be centered and a warning message appears. Case 2: The incoming resolution is higher than 1024x768. In this case, the video data will be turned off and a warning message appears at center. 10 Case 1: Hot-Key Buttons for Quick Adjustment of Monitor Settings. 1. Auto-adjust" " hot-key button: Press the 2nd function button to apply the monitor setting automatically. A small "Auto Adjust" OSD is also displayed. "Contrast-adjust" hot-key button: Press the 1st adjustment control button to allow you to adjust the contrast of the display directly. A small "Contrast" OSD is also displayed. "Adjust-volume" hot-key button: Press 2nd adjustment control button to allow you to adjust the audio volume directly. A small "Audio Volume" OSD is also displayed. * To close the small OSD windows, press the power switch. 11 APPENDIX A Technical Information TFT LCD Monitor Specifications LCD Panel Control Functions Power On-Screen Display (OSD) 15" XGA Software Power switch with LED indicator (ON/OFF) Submenu Horizontal Position/Vertical Position/Phase/Clock/Reset/Exit OSD Horizontal Position/OSD Vertical Position/Exit Language/Audio Volume/Information/Exit Contrast/Brightness/Color/R/G/B Auto Level/Exit 640 x 400/720 x 400 Main Menu Auto Adjust Monitor Control OSD Control Misc. Control Graphic Control Graph/Text OSD Exit Display Area (mm) Display Colors Video Interface Scanning Frequency H/V, Hz Response Time (TR/TF) (typ. ) Contrast Ratio Brightness Viewing Angle (H/V) Power Management Power Consumption (ON/OFF, W) Dimensions WxHxD mm Net Weight (Kg) Approx. Power Supply Environment Audio (Two 1 Watt speakers with amplifier) Regulatory 304. 1 x 228. 1 (15" diagonal) 16. 7M VGA Compatible Analog RGB Composite Sync. 24-62K 50-75Hz 20ms / 5ms 500:1 2 300 cd/m 140° /130° Meets VESA DPMS 30/2. 5Max. 344x332x200 3. 2 Built-In Universal Input Off-Line Power Supply Operating Temperature: 0 to 40° C Relative Humidity: 10% to 90% Yes CUL, TÜV-GS, CE, FCC B, DoC, TCO'99 (optional), Energy star, TÜV-Ergonomics 12 APPENDIX B Supported Timing Vertical Scanning Frequency (Hz) 70. 15 56. 42 66. 67 74. 55 75. 02 70. 09 70. 09 59. 94 72. 81 75. 00 56. 25 60. 32 72. 19 75. 00 70. 09 60. 00 70. 07 75. 03 66. 13 59. 98 70. 04 77. 07 Horizontal Scanning Frequency (kHz) 31. 50 24. 83 35. 00 49. 73 60. 24 31. 47 31. 47 31. 47 37. 86 37. 50 35. 16 37. 88 48. 08 46. 88 31. 47 48. 36 56. 48 60. 02 53. 96 48. 29 56. 59 62. 04 Item Standards Resolution Dot Clock (MHz) 25. 20 21. 05 30. 24 57. 28 80. 00 25. 18 25. 18 25. 18 31. 50 31. 50 36. 00 40. 00 50. 00 49. 50 28. 32 65. 00 75. 00 78. 75 71. 64 64. 13 74. 25 84. 38 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 NEC PC98 NEC PC98 MAC 13" mode MAC 16" mode MAC 17" mode VGA VGA VGA VESA VESA VESA SVGA VESA VESA VGA XGA VESA VESA SUN SUN SUN 640x400 640x400 640x480 832x624 1024x768 640x350 640x400 640x480 640x480 640x480 800x600 800x600 800x600 800x600 720x400 1024x768 1024x768 1024x768 1024x768 1024x768 1024x768 1024x768 *Once a mode is optimized, there is no need to make any further adjustment as long as the VGA card remains unchanged. [. . . ] Servicing of any nature should be performed only by an authorized technician. Safe storage of the LCD monitor is in a range of minus 20 to plus 60 degrees Celsius. Storing your LCD monitor outside this range could result in permanent damage. Immediately unplug your monitor and call an authorized technician when: · The power or monitor-to-PC signal cord is frayed or damaged. [. . . ]