User manual PLANAR PL1500M Product Manual

[. . . ] PL1500M LCD Monitor USER'S GUIDE www. planar. com The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. No part of this document may be reproduced, translated to another language or stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission. Windows is a registered trademark of Microsoft, Inc. [. . . ] Press the Select button to display the OSD Main Menu. Press the UP () or Down () button to move to the Color icon in the OSD Main Menu, and press the Select button. 3. The screen displays three items for adjustment: Color Temp, Black Level Adjust and RGB Adjust. a. 4. Press the Up () or Down () button to move the desired item and press the Select button. Press the Up () or Down () button to change the setting value in the adjustment bar. After changing the setting value, press the Select button to accept the adjustment. After the adjustment, select EXIT to go back to the OSD Main Menu. 12 OSD Display sub-menu To adjust the OSD H and V, positions you should follow the steps below: 1. Press the Select button to display the OSD Main Menu. Press the UP () or Down () button to move to the OSD Display icon in the OSD Main Menu, and press the Select button. 3. The screen displays two items for adjustment: H. 4. Press the Up () or Down () button to move the desired item and press the Select button. Press the Up () or Down () button to change the setting value in the adjustment bar. After changing the setting value, press the Select button to accept the adjustment. After the adjustment, select EXIT to go back to the OSD Main Menu. 13 Factory Recall To recall factory settings back you should follow the steps below: 1. Press the Select button to display the OSD Main Menu. Press the UP () or Down () button to move to the Factory Recall icon in the OSD Main Menu, and press the Select button. 3. Press the Select button to restore the factory default setting values. Language Sub-menu To select one of the five languages for your preference you should follow the steps below: 1. Press the Select button to display the OSD Main Menu. Press the UP () or Down () button to move to the Language icon in the OSD Main Menu, and press the Select button. 3. The screen displays five languages for selection. 14 Press the Up () or Down () button to move the desired language and press the Select button. The change will take effect immediately. Exiting OSD To exit OSD, press the UP () or Down () button to move to the EXIT icon in the OSD Main Menu, and press the Select button. Using the Direct Keys You can use two direct keys for adjustment without entering OSD. One of the two direct keys is for Auto setup, and the other is for the audio function. Performing Auto setup by Direct Key To perform Auto setup by direct key, without entering OSD, simply press the Down () button and Auto setup will start. See "Auto setup" on page 9 for Auto setup procedure. Performing the Audio Function by Direct Key To perform the audio function by direct key: 1. Without entering OSD, simply press the Up () button to display the audio menu. The screen displays two items for selection: Audio Mute and Volume. 3. Press the Up () or Down () button to move the desired item and press the Select button. Press the Up () or Down () button to change the setting. After changing the setting value, press the Select button to accept the adjustment. After the adjustment, select EXIT to go back to the OSD Main Menu. a. 15 Technical Information Monitor Specifications Item LCD Module Display Size Viewing Angle Left/Right Up/Down Display Colors Power Input Maximum power consumption Signal Input Video Signal Sync signals Line (horizontal) frequency Raster (vertical) frequency Pixel dot clock Recommended mode Pedestal tilt Dimensions (W x H x D) Weight Operating Conditions Temperature Humidity Altitude Storage Conditions Temperature Humidity Altitude Specification 15-in, active matrix TFT, anti-glare coating, 0. 297 mm pixel pitch 304 mm x 228 mm -70° / 70° (Typical) -65° / 60° (Typical) 262144 (6 bits/color) 100 ~ 240 VAC Full Range, 50/60 Hz (External AC adapter) < 30W RGB positive 0. 7VPP, 75ohm Separate & Composite, TTL Level 30 kHz ~ 60 kHz 56 Hz ~ 75 Hz 80 MHz (maximum) 1024 x 768 @ 60 Hz 20° backward, 5° forward45° left, 45° right 341 x 323 x 140 mm (with base) 3. 0 kg 5° ~ 40°C at altitude 0 ~ 2, 000m 5° ~ 30°C at altitude 2, 000 ~ 3, 000m 20% ~ 85% RH, non-condensing 3000m Max. [. . . ] If any of the following conditions occurs, unplug the monitor and contact the qualified service personnel: The power cord or plug is frayed or damaged. You have spilled liquid into the monitor. The monitor has been exposed to rain or water. The monitor does not operate correctly when the operating instructions are followed. [. . . ]