User manual PLANAR PL171M Product Manual

[. . . ] Important Safety Instructions Read the Safety Instructions carefully and keep it for later use. Be aware of all warnings and instruction signs marked on the products. When cleaning, cut off the electrical supply at all times. Never use liquid or aerosol detergent, use a damp rag instead. [. . . ] Do not place anything on top of the LCD monitor. Ensure the areas around the LCD monitor are clean and moisture-free. Do not place heavy objects on the power cord, adapter, or signal cables. If smoke, abnormal noise, or strange odor occurs, immediately turn the LCD monitor off and call your dealer. Do not remove the rear cover by yourself. The display unit contains high-voltage parts and may expose you to the electric shock. Contact your local dealer for the service if needed. When moving, always handle your LCD monitor with care. Do not forcefully press down the screen in case of damages to the monitor. Please refer to P. 5 to adjust the monitor. Cleaning the TFT LCD Monitor Wipe screen gently with a clean lens brush of camel hair, or a soft, clean, lint-free cloth. It can remove dust and other particles which will not scratch the LCD panel. If it is still not clean, blow and wipe gently with a soft, clean, lint-free cloth. Never pour or spray any liquid onto the LCD monitor. Do not apply pressure to the LCD panel. 4 Adjusting the Monitor Press down on the stand and gently adjust the monitor to a suitable viewing angle (see Figure below). Please note that this monitor can only be tilted forward to 5 degree and backward to 20 degrees. To prevent damage to the monitor, do not press the screen over its tolerant angles. 5 Quick Installation Make sure the computer is turned off. Attach the female end of the power cord (Indication F) to the adapter (Indication E), then plug the adapter connector to the power "DC-IN (Indication A)" jack of the LCD monitor. When using a power cord, plug the male end into the wall socket. Plug one end of the 15 pin D-Sub signal cable (Indication G) in the "ANALOG" video signal connector (Indication B) of LCD monitor. If you use digital signal, plug one end of the 24 pin DVI-D signal cable (Indication H) in the "DIGITAL" video signal connector (Indication C) of LCD monitor. When using an audio cable, plug one end of the cable in the "AUDIO" jack of the LCD monitor, and plug the other end in the jack of the sound card. Before your operations of the monitor, please refer to P. 7 "Operations" first. D A C B I G H E F A. [. . . ] Select EXIT using the [+] or [-] button, then press [Menu] to exit the OSD. 11 Technical Data Specifications LCD Size Type Color Glass surface Video Sync 17. 0" (full 17. 0" viewable diagonal area) Color TFT Active Matrix Panel (Thin Film Transistor) Supports up to 16. 7M Haze 25%, Hard-Coating (3H) RGB Analog H. Composite Sync (TTL Compatible), Sync on Green, H. F. : 30-80kHz, V. F. : 55-75Hz, Video Bandwidth: 135MHz Up to 1280 x 1024 Power Macintosh® up to 1280 x 1024 150° 125° VESA 1280 x 1024 @ 60Hz 250 cd/m2 (Typ. ) 350:1 (Typ. ) AC100-240 VAC, 50-60Hz, 12VDC Adapter Analog: 15 pin D-sub Connector Digital: 24 pin DVI-D Connector 337. 920 mm (H) x 270. 336 mm (V) 32 F to 104 F (0 to 40 ) 10% to 90% (non-condensing) to 10, 000 feet -4 F to +140 F (-20 to +60 ) 10% to 90% (non-condensing) to 40, 000 feet 393. 2 mm (H) x 400. 4 mm (W) x 180. 0 mm (D) 15. 48" (H) x 15. 76" (W) x 7. 09" (D) 482. 0 mm (H) x 456. 0 mm (W) x 225. 0 mm (D) 18. 98" (H) x 17. 95"(W) x 8. 86" (D) 6. 00 kg (13. 22 lbs) 8. 20 kg (18. 06 lbs) UL, cUL, TUV/GS(option), CB Report FCC DoC, VCCI B, CISPR 22 B, BSMI MPR 1990:10, TCO99 CE EPA, NUTEK SEMKO Power Down, Energy 2000 SEMKO Ergonomics, TUV/Ergo. TCO99, TCO95 47W (green LED) (Typ. ) 3W (orange LED) 2WX2 Input Signal Video Sync Compatibility Viewing Angle Resolution Brightness Contrast Power Connector PC Macintosh® Horizontal Vertical Primary Mode Voltage Input Signal Display Area Operating Conditions Full screen Temperature Humidity Altitude Temperature Humidity Altitude Physical Package Storage Conditions Dimensions Weight Net Gross Safety EMI Low Radiation EMC Energy Star Quality Environment On Off Speakers Regulations Power saving Audio All products and trademarks are brand names of their respective companies. Specifications are subject to change without prior notice. 12 Factory Preset Timings Timing VGA 640 X 350 VGA 720 X 400 VGA 640 X 400 VESA 640 X 480 VESA 640 X 480 VESA 640 X 480 VESA 640 X 480 VESA 800 X 600 VESA 800 X 600 VESA 800 X 600 VESA 800 X 600 VESA 832 X 624 VESA 1024 X 768 VESA 1024 X 768 VESA 1024 X 768 VESA 1024 X 768 VESA 1024 X 768 VESA 1280 X 1024 VESA 1280 X 1024 Horizontal Frequency (KHz) 31. 470 31. 467 31. 469 31. 469 37. 861 37. 500 35. 000 35. 156 37. 879 48. 077 46. 875 49. 715 48. 363 56. 476 58. 036 60. 023 60. 241 63. 981 79. 976 Vertical Frequency (Hz) 70. 089 70. 082 70. 087 59. 940 72. 809 75. 000 66. 667 56. 250 60. 317 72. 188 75. 000 74. 535 60. 004 70. 069 71. 916 75. 029 74. 927 60. 020 75. 025 Sync Polarity (H/V) +/-/+ -/+ -/-/-/Composite +/+ +/+ +/+ +/+ Composite -/-/-/+/+ Composite +/+ +/+ Power Management System This monitor matches VESA® DPMS (Display Power Management Standard) Standards. [. . . ]