User manual PLANAR PT1700MU Product Manual

[. . . ] Don't: Do not touch the LCD panel surface with sharp or hard objects. Do not use abrasive cleaners, waxes or solvents for cleaning. Do not operate the product under the following conditions: - Extremely hot, cold or humid environment. - Areas susceptible to excessive dust and dirt. [. . . ] 2. Increases value of the adjustment items. Switches on/off the power of the LCD display. 1. Green indicates the display is turned on. Amber indicates the display is in power-saving mode. SELECT/AUTO Select/Auto 3 4 Brightness Minus/ Minus Brightness Plus/ Plus Power Switch Power LED 14 How to Use the OSD Menus 1. Press the "Menu" button to pop up the on-screen menu and to select between the four Main Menus. Choose the adjustment items by pressing the "Select/Auto" button. Adjust the value of the adjustment items by pressing the "3" or "4" button. The OSD menu will automatically close, if you have left it idle for a pre-set time. 15 On-Screen Display Menus Main OSD Menu: Main Menu Page 1 Auto-Adjustment Contrast Brightness Horizontal Position Vertical Position Clock Phase No Yes 4 Auto-Adjustment Choose this function to obtain an optimum image. 4 Contrast Adjust the contrast of the display image. 4 Brightness Adjusts the brightness of the image. 4 Horizontal Position Changes the horizontal position of the image. 4 Vertical Position Changes the vertical position of the image. 4 Clock Changes the display data frequency to match the frequency of your graphic card. When you are experiencing vertical flickering bar, use this function to make an adjustment. 4 Phase Synchronizes the signal timing of the display to that of the graphic card. When you are experiencing vertical flickering image, use this function to make an adjustment. 16 Second OSD-Menu: Main Menu Page 2 Display Mode OSD Off-Time Language Sha r pne s s Reset 1280* 1024 FH: 80 kHz (+) + FV: 75 Hz (+) + 4 Display Mode Selects this function to demonstrate the display resolution, vertical refresh, and horizontal scan of the current mode. 4 OSD Off-Time Adjusts the time period for OSD menu to disappear. 4 Language Choose the language you need. 4 Sharpness Adjust the sharpness of the image. 4 Reset Returns the display parameters of the current mode to its factory default settings. 17 Third OSD-Menu: Vo l u m e Mute Main Menu Page 3 - 0 20 40 + 4 Volume It allows toy control the volume sound. 4 Mute It allows you to disable the sound immediately. 18 Fourth OSD-Menu: Color Color Color Color Main Menu Page 4 Setting Adjustment-Red Adjustment-Green Adjustment-Blue 9300K 6500K Preset Custom 4 Color Setting Adjusts the color temperature. 4 Color Adjustment-Red It allows you to adjust the red color of the display. 4 Color Adjustment-Green It allows you to adjust the green color of the display. 4 Color Adjustment-Blue It allows you to adjust the blue color of the display. 19 Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. 4 Check that all the I/O and power connectors are correctly and well connected as described in the " Installation " section. 4 Make sure the pins of the connectors are not crooked or broken. Problem: Partial image or incorrectly displayed the image. 4 Check to see if the resolution of your computer is higher than that of the LCD display. 4 Reconfigure the resolution of your computer to make it less than or equal to 1280 x 1024. Problem: Image has flickering vertical line bars. 4 Use " Clock " to make an adjustment. 4 Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display. Problem: Image is unstable and flickering 4 Use " Phase " to make an adjustment. Problem: Image is scrolling 4 Check and make sure the VGA signal cable (or adapter) is well connected. 4 Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display. Problem: Vague image (characters and graphics) 4 Use " Clock " to make an adjustment. If this problem still exists, use "Phase" to make an adjustment. 20 Warning Signal If you see warning messages on your LCD screen, this means that the LCD display cannot receive a clean signal from the computer graphics card. There may be two sources for this problem. The driver file will automatically open. Select the "TW564SR4. exe" file. Double click the "setup. exe" file. [. . . ] Supported platforms include: Red Hat R Linux 8. 0, Red Hat R Linux 9. 0, and SuSE R Linux 8. 2 and SuSE R Linux 9. 0 on Pentium R -compatible CPUs. The following Xfree86 versions are supported: 4. 0. 3 and 4. 1. 0. Select the "TwLinux5. 62. 1" folder. Double click the "Readme. txt" file. [. . . ]