User manual PLANAR PV150 Product Manual

[. . . ] PLANAR LCD MONITOR PV150 MANUAL www. planar. com Preface PREFACE About this manual This manual is designed to assist you in setting up and using your New Planar LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. [. . . ] You can adjust the sound volume of the stereo speakers by using the speaker volume control function in the OSD (On-Screen Display). 4 Chapter 1 Connecting USB Devices The following section covers connecting USB devices. The LCD monitor supports an upstream and two downstream USB connections. Upstream You can connect the LCD monitor's upstream USB port to your PC's USB port and use the LCD monitor as a USB hub. The following explains how to connect the upstream USB port to your PC: 1. Connect one end of the USB cable to the LCD monitor's upstream USB port. 2. Connect the other end to the PC's USB port. Downstream The two downstream USB ports connect USB devices, such as USB keyboards, scanners and mice, directly to your LCD monitor. Connect the USB device cable to one of the LCD monitor's downstream USB ports. Note: The upstream USB port must be connected to your PC for the downstream USB ports to function. Power Management System The LCD monitor complies with the VESA DPMS power management proposal. The VESA DPMS proposal provides power saving modes by detecting the horizontal or vertical sync signal. Refer to the Addendum for more information. When the LCD monitor is in power saving mode or detects an incorrect timing, the monitor screen will be blank and the power LED indicator starts blinking. 5 CHAPTER 2 The Display Controls LCD Monitor Control Panel 1. OSD Menu Button Press this button to activate the OSD (On-Screen Display) menu. This button is also used as the Selection button. Adjust Button This button allows you to apply settings and enter submenus in the OSD. This button also is used to increase the value of the selected menu item. Function Select Buttons These two buttons allow you to select the control functions in the OSD. Press either button to scroll through the main menu and submenu items. Power Switch Push the power switch to turn the monitor on and off. When you shutdown your computer, the monitor will enter power-saving mode. The LED will slowly flash indicating the display is in power saving mode. Adjust Control Buttons The button allows you to increase the menu item value. The button allows you to decrease the menu item value. Adjusting the Display The LCD monitor features an intuitive, menu-driven, On-Screen Display (OSD). You can access the OSD any time that the PC is powered up. [. . . ] (or you can select the window shut down screen) After you have the wallpaper loaded, open the OSD and select the "Clock" function. Press the top (or bottom) Adjustment Control button and continue pressing the button until you see vertical dark and light lines across the screen. When you can see distinct light and dark vertical bands, stop pressing the Adjustment Control button. Now press the opposite (top or bottom) Adjustment Control button. [. . . ]