User manual PLANET ATA-150S

[. . . ] VoIP Analog Telephone Adapter ATA-150/ATA-150S User's manual Version 1. 0. 1 -1- Copyright Copyright (C) 2009 PLANET Technology Corp. The products and programs described in this User's Manual are licensed products of PLANET Technology, This User's Manual contains proprietary information protected by copyright, and this User's Manual and all accompanying hardware, software, and documentation are copyrighted. No part of this User's Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form by any means by electronic or mechanical. Including photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal use, and without the prior express written permission of PLANET Technology. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose. [. . . ] Default : Off Busy Number Enter the assigned number for busy forward. Default : Null - 24 - No Answer Forward to Check to enable no answer forward function. When phone is not answered for a period of time, incoming call will be forwarded to assigned number. Default : Off No Answer Number Enter assigned number for no answer forward. Default : Null No Answer Time (sec) Set no answer time. Once phone is not picked up after this time, incoming call be will forwarded to assigned number. Default : 0 - Speed Dial Position Speed Dial access code. Press this speed dial number and followed by # can dial out assigned phone number. Name Phone Number Select Name of this speed dial. Set phone number for ATA to make speed dial. User can delete selected speed dial data. - 25 - - Abbreviated Dial (Phonebook) Abbreviated Name Abbreviated Dial (Phonebook) access code. Input this number and followed by # can dial out assigned phone number. Phone Number Set phone number for ATA to make speed dial. - Dial Plan Replace prefix code Select to enable (On) or disable (Off) prefix replace function. Default : Off Relace rule Set prefix replace rule. Once user dial number matched prefix, ATA will replace the number with assigned number. Available parameters are "0~9", "#", "*", "+", "x". Symbol "+" means "or" , "x" could be numbers 0~9. For example, if user set Replace rule as 002+009->005, which means if user dial 002 87654321 or 009 87654321, these number will be dial out as 005 87654321. Default : Null Dial Plan User can set how many digits or which number for ATA to dial out immediately. Available parameters are "0~9", "#", "*", "+", "x". Symbol "+" means "or" , "x" could be numbers "0~9". For example, user can set Dial Plan as "911+xxxxxxxx+*xx, which means if user dial 911, 87654321, or *11, these number will be dial out immediately without waiting for dial time or pressing # sign. Default : Null - 26 - Auto Prefix If user set Auto Prefix number, all number dialed out will be added with this prefix number. Available parameters are "0~9", "#", "*". For example, user set Auto Prefix as 02, number 87654321 will be dial out as 02 87654321. [. . . ] A and B are in the process of conversation. C call to A and A will hear the prompt sounds. A press "Flash" button to hold the conversation with B, and switch to conversation with C. Switch the Default Proxy ATA can register to two different SIP Proxies at the same time. It can receive any one of different SIP accounts incoming call, and it can switch to any one SIP accounts for making calls through input - 46 - the switch code. Realm switch code: #1500#: Realm 1 #1501#: Realm 2 For example: The default is Realm 1, input the #1501# from keypad and hang up the telephone set. [. . . ]