User manual PLANTRONICS CT12

[. . . ] CORDLESS HEADSET TELEPHONE CT11/12 CT11 CT12 PRODUCT INFORMATION BOOKLET BASICS WELCOME This Product Information Booklet contains features and operations not described in the Quick Start Guide (QSG). The QSG also includes warranty information, FCC and the Industry Canada Notice. BASICS . 15 Steps to Enter Names and Special Characters . 16 Storing Names, Phone Numbers, Distinctive Rings, and Speed Dial. [. . . ] 2) Press v or w to view the Phonebook locations (see "Viewing the Phonebook" on page 19). 4) To hang up, press END. SPEED DIALING If you have selected a speed dial memory location (10 locations: SPD1­ SPD0) when storing a phone number in the Phonebook dial location, you can use the speed dialing feature. 1) When the phone is in the standby mode, press and hold a number key (0 ­ 9) associated with the speed dial. The number stored in the speed dial appears. The phone number in the speed dial (SPD1­ SPD0) is dialed. 3) Press END to end the call. PHONEBOOK FROM TALK MODE 1) Press TALK/FLASH. 3) Press v or w to view the Phonebook locations (see "Viewing the Phonebook" on page 19). The number in the displayed Phonebook location is dialed. 5) To hang up, press END. EDITING 1) When the phone is in the standby mode, press /tSPEED. THE PHONEBOOK 2) Press v or w, or the number keypad to view the Phonebook locations (see "Viewing the Phonebook" on page 19). 22 23 CHAIN DIALING 3) When the Phonebook location to be edited appears, press SELECT/CH. 4) Follow the steps 3 to 7 under "Storing Phone Numbers, Names, Distinctive Rings and Speed Dial" starting on page 17 to complete the editing operation. You will hear a confirmation tone and "Done!" appears on the display. The memory locations in the remote are not limited to phone numbers. You can also store a group of numbers (up to 20 digits), that you need to enter once your call connects. An example of this is a bank account number. Store the special number in the Phonebook location (refer to "Storing Phone Numbers, Names, Distinctive Rings and Speed Dial" on page 17). Once you have called your bank, and when you are prompted to enter the account number, press /tSPEED and use v or w to select the number in the Phonebook location, then press SELECT/CH. PHONEBOOK DELETING THE STORED DATA 1) Select the Phonebook location to be deleted. 2) Press v to move the pointer to "Yes". "Deleted!" appears in the display. 24 25 ONE TOUCH DIALING FOR ONE NUMBER You can store one number that you dial often in the One Touch Dial. The one touch dialing allows you to dial that number with one key press. MAKING CALLS WITH THE ONE TOUCH DIAL When the phone is in the standby mode, press and hold /tSPEED. The number in the one touch location is dialed. STORING THE ONE TOUCH DIAL PHONEBOOK 1) When the phone is in the standby mode, press /tSPEED. 2) Press w once to display the One Touch Dial menu. 4) Store the name, phone number, and distinctive ring by following the steps 3 to 6 under "Storing Phone Numbers, Names, Distinctive Rings and Speed Dial" on page 17. [. . . ] · Check both ends of the base tele phone line cord. · Make sure the AC adapter is plugged into the base and wall outlet. · Disconnect the AC adapter for a few minutes, then reconnect it. · Change the digital security code (See page 37). [. . . ]