User manual PLANTRONICS HL10 LIFTER FOR AVAYA AMPLIFIERS

[. . . ] 2 To ensure safe operation, install, adjust and operate the HL10 Handset Lifter according to these instructions. 3 Keep fingers and other objects clear of the lifting pad. 4 Unplug the amplifier or power source from wall outlet before cleaning. [. . . ] 2 To ensure safe operation, install, adjust and operate the HL10 Handset Lifter according to these instructions. 3 Keep fingers and other objects clear of the lifting pad. 4 Unplug the amplifier or power source from wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. 5 Do not allow anything other than the telephone handset to rest on this product or locate it in an area where normal operation can be hampered. Additional weight will prevent the lifter from working. 6 Do not locate or operate this product in a moist environment. 7 Do not place this product on an unstable cart, stand or table. The product may fall causing serious damage to the product. SAVE THESE INSTRUCTIONS 61851_01. qxd TECHNICAL SUPPORT For assistance and accessibility information call the Avaya Technical Assistance Center (TAC) (800) 628-2888 Sunday 5P. M. Pacific Standard Time Avaya Technical Assistance Center After you have completed the instructions in the Quick Start Guide and reviewed the Troubleshooting Section (the inside foldout) and still have questions, please contact our Technical Assistance Center. 12/6/01 61851-01 (12. 01) 12:31 AM Page 1 HL10 Handset Lifter Accessory Quick Start & Information Guide 61851_01. qxd 12/6/01 12:31 AM Page 2 HL10 HANDSET LIFTER ACCESSORY 1. 2 Lifting Pad Back and Underside View 1. 3 Lifter Height Switch 1. 1 Motor Housing 1. 4 Accessory Jack Position and Test Lifter (Do not remove the mounting tape backing until directed to do so. ) 2. 2 2. 1 1. 5 Power Cord Top View Identify Lifter Parts Make and Receive Calls 4. 1 Mount Lifter 4. 2 3. 1 Mounting Tape Underside View QUICK START GUIDE The HL10 Handset Lifter accessory is designed to automatically lift the telephone handset off the cradle when activated by your Avaya amplifier. 4 Make And Receive Calls 4. 1 Put on your headset and press the talk button. 4. 2 This action directs the lifter to raise the telephone handset from the cradle and activates the telephone line. To make a call, use your telephone or remote dial pad to dial the number. When your call is complete, press the talk button again to hang up. When receiving a call, the ring detector senses a ring from your telephone and transmits it to your remote unit or headset. You can answer the call by pressing the talk button and begin talking through your headset. When finished press the talk button again to hang up. [. . . ] The lifter does not lift the handset First check that the headset works by manually lifting the telephone handset from its cradle. s Reset the remote unit or headset into the charger for 20 seconds to reestablish synchronization. s 2. 2 Use the three position lifter height switch to adjust the lifter to its optimum height. Test the lifter`s position by pressing the talk button on your amplifier, remote unit or headset. [. . . ]