User manual PLUSTEK SMARTOFFICE PL7000

[. . . ] The contents of this manual are subject to change without notice. This NVR device is intended to be used in a lawful manner. Certain uses of the NVR device may be prohibited by local laws in some countries of states, such as the surreptitious recording of audio and/or video communications for certain purposes. If you have any question about whether a proposed use of your products is lawful, you should consult a local legal authority before proceeding. [. . . ] Please refer to the Event Settings section for more information. Video Settings To set video display: 1. Go to the "Advanced" page then click the menu "IPCam" "Video Settings". Select the camera you want to adjust the video settings for from the dropdown list. In "Image Appearance" section, you may adjust the Resolution, Quality, Rotation angle, Color saturation, Brightness, and Sharpness for the video image displayed by the camera. In the "Overlay Settings" section, you can add some text information to the video image, such as Data/time and a text title. You may choose Top or Bottom from the dropdown list to display the information at the top or bottom of the image. The text information will be shown in live view, snapshot and recorded video. Enter the camera LiveView and Record frame rates. The frame rates may range from 1 to 30 fps. Event Settings In the Event Settings menu, you may configure the event the IP Camera responds to and the output reaction the IP Camera will trigger. 21 To add an event 1. Go to the "Advanced" page then click the menu "IPCam" "Event Settings" to enter the Event Settings window. Click "Add" button to enter "Add Event Settings" page. The administrator can add up to 9 users as General Users. A General User is only authorized to view the live video of the cameras in the "Live View" page and starts or stops the live view process. The Administrator has access right to all the functions of the NVR in the "Live View" and "Advanced" pages. Maintenance Go to the "Advanced" page then click the menu "System" "Maintenance" to display the Maintenance page. In the maintenance page, you may update firmware, backup and restore settings, reset, restart, or turn off the NVR system. Update firmware To update the NVR firmware: 1. Click on the "Browse" button to find the latest firmware you have downloaded. Click on the "Upgrade" button to load the firmware in your NVR and the upgrade will start automatically. The NVR system will automatically restart after the update is complete. Backup settings To backup the current settings: Click on the "Backup" button to backup all the settings you've made in the NVR system, and a window will pop up asking you to save the backup file named as "NvrHistory. tar. gz". You may choose a saving folder for the backup file. 24 Restore settings To restore previous settings: You may restore the NVR to previous settings by loading a saved backup file. (See the above Backup settings section for more information on how to backup system settings. ) 1. Click on the "Browse" button to find the backup file you have saved. Click the "Restore" button and the restoration will start automatically. [. . . ] Before presenting this product for warranty service, you must remove all programs, data and removable storage media. Products returned without guides and software will be replaced without guides and software. This Limited Warranty service does not provide for carry-in exchange when the problem results from accident, disaster, vandalism, misuse, abuse, unsuitable environment, program modification, another machine or non-vendor modification for this product. If this product is an optional feature, this Limited Warranty applies only when the feature is used in a machine for which it was designed. 41 If you have any questions about your Limited Warranty, contact the approved retailer from whom you bought the product or the manufacturer. [. . . ]