User manual POLARIS NRX-1

[. . . ] The unit will terminate a call and let you dial the number for another call. 2. 2 Tone or Pulse Option To find out whether you are on a digital exchange that accepts tone dialing, locate the switch marked TONE / PULSE inside the compartment underneath the unit. First try dialing out with the switch in the TONE position. If this is unsuccessful, switch back to the PULSE position. [. . . ] If this is the case then "recall" can be activated by 'flashing' the switch-hook or by repeated use of the recall. Recall problems with this product are not to be reported to Telecom Faults Service. 2. 6 Message Waiting The NRX-1 has a built in LED neon lamp for message waiting indication. This is compatible with various PABX systems providing such features. A Message waiting switch is built inside the compartment under the unit. This switch enables the LED to detect two different line signals by selecting switch position 1 or 2. For 90V DC or AC message waiting signaling PABX the neon is used for indication. Set the position of the switch to OFF as the LED is not needed for indication. Please note the compartment door should be replaced when settings completed. 2. 7 Last Number Redial If you dial a number and find it is engaged or there is no reply, replace the handset. The number will be retained in the memory until you dial a different number. To redial the last number automatically. . . What you do: Lift the handset or press the NEW CALL key Press the "REDIAL" button. 5 8733 NRX-1_User Guide. qxd 8/12/2003 2:01 PM Page 6 NRX-1 - The telephone for the corporate user 2. 8 Adjustable Ringing Volume On the right of the unit is a switch, this adjusts the ringing volume of incoming calls. From left to right it has three positions: off, low, high. Move the switch to the position you require. In addition to the ringing tone there is a Ring Indicator Lamp on the unit that will flash when the telephone is ringing as a visual indication. The Ringer Switch does not control this Ring Indicator Lamp. 2. 9 Adjustable Ringing Tone Pitch The ringer tone ringer melody repetition rate can be adjusted in off hook condition, as follows: Pitch 1 2 3 Setting Code `Mute' + `#' + `3' + `Mute' `Mute' + `#' + `6' + `Mute' `Mute' + `#' + `9' + `Mute' 2. 10 Privacy (Muting the Microphone during Conversation) During a telephone conversation, you may switch off the microphone in the handset by pressing the Mute button on the telephone base. The mute LED will be flashing to indicate that the microphone is muted and the other party, on the other end of the telephone line is not able to hear your conversation. Press the Mute button again to release the Mute function and the LED will be off. [. . . ] WALL ­ MOUNTING THE UNIT The NRX-1 can be wall mounted using the wall mount bracket installed on the bottom of the unit. Dismount the wall mount bracket from the unit Place the wall mount bracket on the required position on the wall Drill two holes on the wall according to the distance as marked by two mounting holes. Install the two screws supplied with the unit in the wall. Re-install the wall mount bracket to the bottom cabinet for the wall mount position. [. . . ]