User manual POLARIS NRX-4

[. . . ] 2. 2 Two Line Facility The telephone automatically selects the first free line when the handset is lifted or the speaker button depressed. The line in use is indicated by a red LED on the line button. 2. 3 Hold During the course of a conversation the line can be put on Hold by simply pressing the hold button. A green LED will light on the line button concerned. [. . . ] To enable the programming [STORE] [VOL UP] [STORE] [1] 2. 7 Memory Dialling To dial a telephone number that has been stored in one of the direct memory locations 1. Lift the handset or press the 'Speakerphone' button. When you hear the dial tone, press one of the memory location buttons. 2. 8 Privacy (Muting the Microphone during Conversation) During a telephone conversation, you may switch off the microphone in the handset by pressing the Mute button on the handset. As long as the handset Mute button is pressed, the microphone mute function is activated. Releasing the handset Mute button will re-enable the microphone for conversation. 2. 9 Modem/Data Connection Socket The NRX4 telephone has an additional socket marked MODEM, which allows the user to connect an extra telephone, modem or fax machine to the telephone line. This socket is at the back panel of the base cabinet and has a removable plastic cover. 5 7923 NRX4_Brochure2. qxd 8/12/2003 2:08 PM Page 6 NRX-4 - The Two Line Telephone with Conference Facility 2. 10 Message Waiting The NRX4 has a built in LED and neon lamp for message waiting indication. This is compatible with various PABX systems providing such features. A message waiting switch is built inside the switch compartment located on the base bottom. This switch enables the LED to detect two different line reversal signals by selecting switch position 1 or 2. For 90V DC or AC message waiting signalling PABX's the neon is used for indication. Set the position of the switch to off, as the LED is not needed for indication. Please note the compartment door should be replaced when settings completed. 2. 11 Last Number Redial If you dial a number and find it is engaged or there is no reply, replace the handset or depress the speaker button. The number will be retained in the memory until you dial a different number. What to do: Lift the handset or press `Speakerphone' button Press the 'Redial' button 2. 12 Adjustable Ringing Volume On the right of the unit is a switch, this adjusts the ringing volume of incoming calls. From left to right it has three positions: off, low, high. Move the switch to the position your require. In addition to the ringing tone there is a Ring Indicator Lamp on the unit that will flash when the telephone is ringing as a visual indication. [. . . ] Placing the wall mount bracket to the required position on the wall. Drill two holes on the wall according to the distance as marked by two mounting holes. Install the two screws supplied with the unit in the wall. Re-install the wall mount bracket to the bottom cabinet for the wall mount position. [. . . ]