User manual POLARIS NRX-5

[. . . ] 1. 2. 2 Using the SCROLL or buttons will switch among the various setting modes of the main System Menu loop as shown below: SET TIME BACKLIGHT SET RECALL TIME MODE DIAL MODE LCD CONTRAST MESSAGE WAITING 3 9021NRX5. qxd 8/12/2003 2:04 PM Page 4 NRX-5 - Display Feature Phone 1. 2. 3 Set Time Scroll to 'SET TIME' on the System Menu and then press the SELECT button. Use the scroll buttons to adjust to the desired time and date using the SELECT button for confirmation after setting HOUR, MINUTE, DATE & MONTH. 1. 2. 4 Set Recall Scroll to 'SET RECALL' on the System Menu and then press the SELECT button. Use the scroll buttons to adjust the required setting of either TBR (Timed Break Recall) or EARTH (Earth Recall) then press the SELECT button to confirm. [. . . ] This indicator is independent of the ringer volume switch position. While the phone is ringing, you can adjust the ringer tone of your telephone by moving the ringer pitch switch. 2. 4 Direct Memory Buttons 5 one-touch speed dial numbers and 5 two-touch speed dial numbers can be programmed into the memory of your phone. Each memory location can store a maximum 16 digits phone number and a maximum 16 letters for name. Enter the phone number using the keypad 3. Enter the memory name using the keypad i. e To enter 'A' press the 2 button once, to enter 'B' press the 2 button twice etc. Press then memory button (Use the SHIFT button to access the second bank of memories). 6 9021NRX5. qxd 8/12/2003 2:04 PM Page 7 NRX-5 - Display Feature Phone During the memory storage procedure, you may wish to press the REDIAL/PAUSE button to insert a pause between numbers. A "P" will show on the LCD to indicate a 2 second pause in the dialling sequence. There are four different ways to dial a stored speed dial number, depending on your preference. Pick up the handset and press the desired memory button 2. Press the SPEAKER/HEADSET button and then press the desired memory button. Press the desired memory button and check the LCD shows the correct information. Press the desired memory button and check the LCD shows the correct information. If the one-touch or two touch memory button pressed has not been stored with a number, the LCD will show ---------------- and EMPTY and no dialling action will be made. 2. 5 Phonebook The NRX-5 can store up to 200 of your frequently used names and numbers. Press MENU button once and the display will show PHONE BOOK XX, where XX denotes the number of phone book records stored. When number is displayed correctly, (up to 16 digits can be stored). Press SELECT button to end the number entry and start name entry. Step4: Using the keypad letters to enter names, press the key until the correct letter is displayed. When correct letter is displayed, move on to the next letter if it is on another key. If you want to enter two successive letters that are on the same key, you can press the SCROLL ?key between letters or wait for 2 seconds after the first letter has been shown and the cursor moves to the next space. [. . . ] 2. 8 Redial To redial the last dialled number, pick up the handset or press the SPEAKER/HEADSET button, then press the REDIAL/PAUSE button. The telephone will automatically redial the last number dialled. Alternatively, press the REDIAL/PAUSE button while the NRX-5 is at off-line, the display will show the last dialled number and its call duration. Pick up the handset or press the SPEAKER/HEADSET button, the telephone will automatically dial the last number dialled. 9 9021NRX5. qxd 8/12/2003 2:05 PM Page 10 NRX-5 - Display Feature Phone 2. 9 Pause If the REDIAL/PAUSE button is pressed between numbers, a "P" will show on the LCD to indicate a 2 second pause in the dialling sequence. [. . . ]