User manual POLAROID DIGITAL PHOTO PICTURE FRAME IDF 7

[. . . ] Avoid exposing the Digital Photo Picture Frame to rain, water, moisture or high humidity. Do not place it in a bathroom or kitchen near a sink or where it may come in contact with water. Never place heavy or sharp objects on the LCD panel, frame, or power cord. Overloading Outlets Do not overload electrical power sources when using the Digital Picture Frame. [. . . ] If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner on a clean, soft, lint-free cloth to clean the screen. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive detergent on a clean, soft, lint-free cloth to clean the surface. To Clean the Frame: Use a soft, dry cloth. Disclaimer Your Authorize Dealer does not recommend the use of any ammonia or alcohol-based cleaners on the LCD screen or plastic casing. Some chemical cleaners have been reported to damage the screen and/or display case. Your Authorize Dealer will not be liable for damage resulting from the use of any ammonia or alcohol-based cleaners. Package Contents · Digital Photo Picture Frame (7" LCD Screen) · Remote Control · AC/DC power supply adapter · User's Manual Quick Start 1. Plug the AC adapter into the Digital Photo Picture Frame and plug it into a wall outlet. Insert a memory card into one of the three slots or inset peripheral USB equipment into USB host: Slot 1 - Secure DigitalTM or MultiMedia CardTM Slot 2 - Compact FlashTM Slot 3 - Memory StickTM, Memory Stick PROTM, Memory Stick DuoTM, or Memory Stick PRO DuoTM 3. Turn on the Power Switch on the back of the Digital Photo Picture Frame. Once the Digital Photo Picture Frame has been turned on, the unit will enter the "Select Card" page automatically. Press the >> or << button to select one type of memory cards and press the Play (/II) button to enter "Select Mode" page. Press the >> or << button to select one mode and press the Play (/II) button to enter. Or press the EXIT button to back to the "Select Card" page. Follow step 6, press the >> or << button to select one picture and press the Play (/II) button to view it in full screen. Then press the >> button to next picture or press the << button to previous picture. When viewing a picture, press the Play (/II) button again to enlarge the current picture. Under zoom in state, press the >> button to move to the right side of the picture and press the << button to move to the left side. Press the EXIT button to zoom out the picture to original size. Press the EXIT button for one second to access the on screen display (OSD). Press the >> or << button to choose one item and press the Play (/II) button to enter. Press the >> or << button to choose one option and press the Play (/II) button to confirm your choice. Press the EXIT button to exit the OSD. Your Digital Photo Picture Frame Remote Control Functions / Instruction Guide Set Favorite Exit Display Type Setup Rotate Up Arrow Left Arrow Right Arrow Slide Show Play / Pause / Enter File Mode Photo Mode Down Arrow Card Select OSD Menu Functions All function settings for the Digital Photo Picture Frame can be controlled via the buttons located on the top of the frame. You will be able to access the on screen display (OSD) at any time, except when in Slide Show Mode, by simply holding down the "EXIT" button for one second or press remote control setup button. OSD Menus Mosaic View Image Size Slide Show Effect Sub-Menus On Off Original Optimal Off Fade Shutter Cross Comb Mask Brick Dissolve Bar Random Fast Normal Slow On Off Are you sure? [. . . ] A: First, make sure that you are using a memory card that is supported by the Digital Picture Frame. Second, ensure that the memory card is inserted all the way into the correct slot. Third, press the EXIT button until you reach the "Select Card" page. If the memory card is properly inserted into the slot, that memory card icon will be highlighted. Note: Some digital cameras save images into non-standard formats. [. . . ]