User manual POLAROID FLM-0711LA

[. . . ] 7" Portable LCD TV with NTSC Tuner FLM-0711LA 20060525 Polaroid. Add a little color to your life. Since 1937, America has turned to Polaroid for their photography needs. Today, families look to Polaroid for consumer electronics that define the digital age: plasma and LCD TVs, portable and standard DVD players, digital cameras. And while our selection has changed, you'll still receive the same friendly, helpful service that made Polaroid an American icon. [. . . ] TV/AV Switch Switch to TV to receive TV programs and output AV signal; switch to AV to input AV signal. DC 9. 5V Input Jack Used to connect the AC adapter or DC adapter. Rear Panel When using the unit, pull the bracket on the rear panel out, and place the unit resting on the table. -7- Remote Control Description Remote Control -8- Remote Control Description 1. Power button Press to access or exit standby mode. LCD ON/OFF button Press to turn on or off the LCD screen display. 16:9 button Press to change the screen aspect ratio to 16:9. 4:3 button Press to change the screen aspect ratio to 4:3. MENU button Press to enter or exit the setup menu. Direction buttons () Press to select or adjust items. ENT button Press to confirm the selection in setup menu. EDIT button In TV mode, press to edit the channels. CH - button In TV mode, press to select channels backward. CH + button In TV mode, press to select channels forward. 0-9 number buttons Select numbers by pressing these buttons. -/-- button In TV mode, press this button and the additional number buttons to select item numbers which are greater than 9. CH DISP button Press to display the status information, press again to cancel the display. MUTE button Press to turn on/off the speaker output. P-MODE button Press to change the current picture mode among standard, memory, soft and light. TIMER button Press to display the sleep time on the screen, and then use the to select sleep time. LAST button Press to return to the previous channel that you have viewed. -9- Preparation of Remote Control · · · · The battery size is CR2025 Refer to the drawing below, to remove the battery receptacle. Insert the battery with the correct polarity facing up according to the mark on the battery holder. Re-insert into the remote control. Usage of remote control For best results, please aim the remote control directly at the unit's remote sensor. Please operate the remote control within angles about 60 degrees and distance about 5 meters without obstructions between the remote control and the unit. · · The life of the battery is about six months in normal use. [. . . ] Do not connect the unit to the car adapter when you start the car. Connecting to a Headphone Connect the headphone to the headphone jack on left side of the unit. When headphones are connected to this jack, the speaker will be turned off automatically - 16 - System Connections Connecting to CATV antenna Connect one end of the provided connecting line to the TV signal input jack on the right panel of the unit, and the other end to the CATV signal source, as shown below: After connection, switch the TV/AV to TV. Connecting to external antenna (1) Plug the provided external antenna (1) to the TV signal input jack and two fixing jacks on the right panel of the unit, as shown below: After connection, switch the TV/AV to TV. - 17 - System Connections Connecting to external antenna (2) Plug the provided external antenna (2) to the TV signal input jack on the right panel of the unit, as shown below: After connection, switch the TV/AV to TV. - 18 - TV Setup Preparation 1. Connect the unit to the external antenna or CATV connecting cord. Press the MENU button to enter the setup menu. Picture Setup Menu Press the MENU button once to enter the Picture setup menu, as shown on the below: PICTURE COLOR CONTRAST BRIGHT 30 30 30 The items in the menu are used to adjust the brightness, contrast, and color of the screen. Press the button to select the desired item. [. . . ]