User manual POLAROID FLM-1511

[. . . ] Congratulations on your new Polaroid LCD TV purchase. To ensure your new LCD TV provides you with years of enjoyment, please read this guide carefully. Instruction Manual WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Caution: To reduce the risk of electric shock, do not remove cover (or back). Refer servicing to qualified service personnel. [. . . ] Caution: When connecting, plug directly and lightly to the interface, otherwise you may damage the pins in the connector. Ensure that every AV signal cord is correctly connected to the corresponding jack. Put the DC power plug in the DC input outlet of the TV, then plug the AC power plug of the power adapter in the AC power outlet. The panel can be tilted upwards up to 100 to achieve better viewing angle. When doing so, rotate the TV with two hands, one to hold the pedestal, the other to tilt the panel. Take care to do this with moderate pressure to prevent damage to the TV. GENERAL OPERATION To Turn the TV On After the power cord is plugged into the power socket, the TV will enter Standby mode. Press on the remote control or the front panel to turn the TV on To Turn the TV Off 1. Press on the remote control or the front panel to turn the TV off. Unplug the DC power adapter from the AC wall outlet and then unplug the power adapter from the TV to turn the set off completely. Caution: The TV will be shut off automatically when AC power is interrupted. Unplug the power adapter from the AC outlet if this happens. In situation 3, the TV will also return to the Tune menu. Name To name channels, press Vol+/Vol- to select the input character position while using four number buttons on the remote control to enter characters: 1: Capital English; 2: Arabic numbers (0-9); 3: Special characters such as "#"; 4: Resuming "*" in unnamed status. Note: There is a PC Setup menu for the Tune menu in PC signal source; there is no Tune menu in AVS, Video, or YPbPr signal source. Clock Clock The current time can be input by pressing the number buttons (0-9) and Vol+/Vol-. Time/ Off Time The function of Time/Off Time is only active when Time/Off Time is on. Press the number buttons and Vol+/Vol- to adjust the time. Press CH+/CH- to select the options in Clock mode: Time, Channel, and Off Time. Press Vol+/Vol- to set the corresponding value. Whenever the main power is turned off and back on, the clock displays "12:00AM". Use Vol+/Vol- to switch between AM and PM and use numeric buttons to set the time. Use Vol+/Vol- to set times in the On Mode between Off, Once and Always. Off indicates this function is not available. [. . . ] They are respectively stored in Air or Cable mode 2. In Auto mode, the TV stores the channel name (if any has been programmed) to Favorite Channels. It will save the latest five available channel names. In Manual mode select different sorting options with CH+/CH-. [. . . ]