User manual POLAROID FLM-1514B

[. . . ] 15" LCD Television FLM-1514, FLM-1514B, FLM-153B, FLM-1517 Your LCD TV may look slightly different from the one pictured above. 20061004 Table Of Contents Important Safety Instructions--------------------------------------------------1 Product Features ---------------------------------------------------------3 Front Panel---------------------------------------------------------------------------4 Rear Panel----------------------------------------------------------------------------5 Remote Control---------------------------------------------------------------------6 System Connections--------------------------------------------------------------8 Connecting to External AV Signal Source-------------------------------------8 Connecting to External AV Signal Source (Component)------------------10 Connecting to PC ------------------------------------------------------------------11 Connecting to Power Cable-----------------------------------------------------12 Connecting to TV Signal ---------------------------------------------------------13 Connecting to Headphones------------------------------------------------------15 TV Functions-----------------------------------------------------------------------14 Preparations-------------------------------------------------------------------------14 Image Setting-----------------------------------------------------------------------14 Audio Setting------------------------------------------------------------------------15 Sleep Setting------------------------------------------------------------------------16 Parental Setting---------------------------------------------------------------------17 Setup Setting------------------------------------------------------------------------20 Other Functions-------------------------------------------------------------------23 External AV Input Function------------------------------------------------------23 Computer Screen Function------------------------------------------------------23 Troubleshooting------------------------------------------------------------------24 Specifications---------------------------------------------------------------------25 1 Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. POWER SUPPLY: Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will not the used for a long time, disconnect the plug from the outlet. [. . . ] After connection, turn on the power of the unit and the external AV signal source and then press the INPUT button to shift to S-VIDEO mode. - 10 - System Connections Connecting to External AV Signal Source (COMPONENT) Use the audio and video cables to connect the COMPONENT (Y/Pb/Pr) input Jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then press the INPUT button to shift to Component mode. - 11 - System Connections Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit. Connect the other end to the PC audio output jack. Please set the PC's resolution at 1024x768@60Hz After connection, turn on the unit and the PC and then press the INPUT button to shift to VGA mode. - 12 - System Connections Connecting the Power Cable Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will not the used for a long time, disconnect the plug from the outlet. - 13 - System Connections Connecting to TV Signal This unit can be connected to the TV signal input source via the TV jack on the rear panel. After connection, turn on the power of the unit, press the INPUT button to shift to TV mode. After connecting to the antenna, turn on the unit, and go on with program searching, you can follow the below steps to select channels: 1. For 0~9 channel: Press the number buttons to select the channel X, wait two seconds and it will go to the selected channel. Or press the number buttons to input 00X, it will go to the selected channel immediately. For 10~99 channel: Press the number buttons to select channel XX, wait two seconds and it will go to the selected channel. For 100~125 channels: Press the number buttons to select channels XXX, and it will go to the selected channel. Press the MENU button to return to the previous menu. Note: This item is only available in Component and VGA modes. Audio Setting Press the MENU button once to enter the setup menu. Press the button to select Audio and press the OK button to enter the menu shown on the right. In the Audio setup menu, press the button to select the desired item and press the OK button to enter. Press the MENU button to return to the previous menu. Volume Setup Press the button to select Volume and press the button to adjust the level. Press the MENU button to return to the previous menu. Bass Setup Press the button to select Bass and press the button to adjust the level. Press the MENU button to return to the previous menu. - 16 - TV Function Treble Setup Press the button to select Treble and press the button to adjust the level. [. . . ] Then turn on the unit and the external AV signal source. Press the INPUT button to shift to the corresponding mode: S-VIDEO, Composite or Component. Then you can go on to set up the menu in a certain mode. Computer Screen Function The TFT LCD screen of the unit can be used as the computer screen. Take the steps of connecting the unit to the PC and then you can set up the menu. [. . . ]