User manual POLAROID FLM-2634BM

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient/Relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit which is different from what the receiver is connected to. [. . . ] Read all instructions before continuing with the stand installation. a) Lift foam packaging material from the top of the TV out of the box. b) Lift TV out of box, with the bottom foam packaging material still attached, and place onto a stable furface. c) Remove the protective bag from the LCD unit, but DO NOT remove packaging material. d) Locate the place on the back of the TV to attach the stand. To select a device, simply select one of the following device mode controls: TV, CBL/SAT, DVD/VCR, or AUDIO. 1 2 3 1 4 5 Turns the LCD TV on and off 2 SET Remote control universal code setup. For more information on setting up your remote control, please see the "Programming Your Remote Control" section in the back of your manual. 6 3 TV Controls this LCD TV 2 4 7 8 10 11 13 12 14 CAB Controls Cable Converter or Satellite Receiver Controls DVD player or Video player DVD 9 AUX Controls Audio Amplifier 15 2 5 SLEEP Cycles through the LCD TV sleep time: OFF/30/60/90/120 mins Other device function keys 6 16 17 18 7 8 19 VOL+CH+MUTE Increases and decreases volume Change channel up and down Pressing once mutes audio. Pressing again restores audio Cycles through Wide mode settings: NORMAL/FULL/WIDE/ZOOM Returns to previously selected channel 9 10 ASPECT 20 11 LAST 12 GUIDE In HDTV mode, pressing GUIDE displays the Program Guide on the screen Turns PIP/POP on and off 2 13 PIP 12 Chapter 2 Installing the LCD TV 14 2 3 1 4 5 MENU Displays the OSD menu on the screen. ENGLISH individual menu items. OK confirms option settings 15 , OK Cycles through OSD options and selects OK 6 In HDTV mode, pressing OK to display a digital channel list 16 CAPTION Cycles through the Closed Caption: OFF/CC1/CC2/CC3/CC4/TT1/TT2/TT3/ TT4 7 8 17 9 12 10 11 13 14 INFO Displays information on the LCD TV screen such as channel and channel label 18 EXIT Exits the OSD menu 15 19 0-9/ENTER Pressing a number selects a channel. Following selection, pressing ENTER activates the channel, or channel activates automatically in 3 seconds Pressing INPUT to display a source list, use buttons to select the video equipment connected to the video inputs of your LCD TV: TV/HDTV/VIDEO1/ VIDEO2/VIDEO3/VIDEO4/VIDEO5/ VIDEO6/COMPUTER In HDTV mode, use with 0-9 and ENTER buttons to select a digital channels 16 17 18 20 INPUT 19 20 Effective range: The remote can control the LCD TV from up to 5m away, if pointed directly at the receiver. 13 Chapter 2 Installing the LCD TV Chapter 2 Installing the LCD TV Refer to the owner's manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Connecting a TV Cable or an Antenna Antenna Connection The antenna requirements for good color TV reception are more important than those for a black & white TV reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connection that is provided with the various antenna systems. A 75-ohm system is generally a round cable (not included) with Ftype connector that can easily be attached to a terminal without tools. F-type connector 75-ohm coaxial cable (round) A 300-ohm system is a flat twin-lead cable (not included) that can be attached to a 75-ohm terminal through a 300-75-ohm adapter (not included). 300-ohm twin-lead cable (flat) 14 Chapter 2 Installing the LCD TV Use one of the following two diagrams when connecting an outdoor antenna. A: Shows how to use a VHF/UHF combination outdoor antenna. Use a S-Video cable to connect the VCR's s-video output jack to the LCD TV's S-VIDEO IN input jack. Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. Press the POWER button on the remote to turn on the LCD TV. To watch a videotape, press the INPUT button on the remote to select VIDEO2( METHOD A), or VIDEO3 (METHOD B). 18 Chapter 2 Installing the LCD TV Connecting a Video Camera or Play Station Rear of TV ENGLISH Right Side VIDEO L R VIDEO1 IN AUDIO Cable or S-VIDEO Cable PLAY STATION B AV Cable A METHOD A: Use a composite cable to connect the video camera's or play station's composite video/ audio jacks to the LCD TV's VIDEO2 IN jacks or VIDEO1 IN jacks. METHOD B: Use an audio cable to connect the video camera's or play station's audio output jacks to the LCD TV's audio inputs. Use a S-Video cable to connect the video camera's or play station's s-video output jack to the LCD TV's S-VIDEO IN input jack. Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. Press the POWER button on the remote to turn on the LCD TV. To watch a video vis camera or play station, press the INPUT button on the remote to select VIDEO2/VIDEO1( METHOD A), or VIDEO3 (METHOD B). Not all cameras have the ability to connect to a TV. Please check your video camera user guide for compatibility. 19 Chapter 2 Installing the LCD TV Connecting a DVD Player Rear of TV or Pb Pr COMPONENT/AUDIO Cable AUDIO Cable S-VIDEO Cable AV Cable A B C Pb Pr D V D PLA YER METHOD A: Use a composite cable to connect the DVD player's composite video/audio jacks to the LCD TV's VIDEO2 IN jacks. METHOD B: Use an audio cable to connect the DVD player's audio output jacks to the LCD TV's audio inputs. [. . . ] Start Time: Selects to set the time that you want the TV to turn on. Stop Time: Selects to set the time that you want the TV to turn off. Channel: Selects to set the specific channel that you want the TV to tune. Activate: Selects to turn on/off/once the timer (each day). [. . . ]