User manual POLAROID PDM-2737 (EXTRA SCREEN)

[. . . ] Plug the two-prong end of the power cord to an AC100-120V outlet. If you have difficulty inserting the plug, turn it over and reinsert it, if the unit will not the used for a long time, disconnect the plug from the outlet. NOTE: Before plugging the power cord into an AC outlet, make sure that all the connections have been made. [. . . ] If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 8) 9) 10) 11) 12) 13) 14) 15) Note: Do not touch the color TFT LCD screen by hand directly. 3 Contents Important Safety Instructions View of Front Panel View of Side Panel System Connection Power Supply Preparation Rechargeable Battery Troubleshooting Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4 View of Front Panel 1. 2. POWER button Press to access to or exit from the standby mode. -/+ button Press to adjust the value of brightness and color. 3. MODE button Press to change the brightness and color level, press and hold for 1-2 seconds to change the aspect ratio. 4. 5. Speaker Power Indicator In normal playback status, it doesn't indicate and it turns red in standby mode. 6. LCD Screen 5 View of Side Panel 1. Volume Control Used to adjust the volume of the headphone and speaker. 2. Headphone Jack Used to connect headphones for private listening. When the headphones are connected to this jack, the speaker will be turned off automatically. 3. Audio Input Jack Used for audio input. 4. Video Input Jack Use for video input. 5. DC 9. 5V Output Jack Used for output power to the master DVD player. 6. DC 9. 5V Input Jack Used to connect the power adapter, including the car adapter. 6 System Connections Connect to Master DVD player 1. Make sure that the master DVD player, slave LCD screen and any other electrical equipment are off before connection. Connect the AC adapter to the slave LCD screen and connect the slave LCD screen with the master DVD player using power supply cord to supply power to the master DVD player. Use audio and video cables to connect the slave LCD screen with the master DVD player so that the master DVD player can input audio and video to the slave LCD screen. 3. Please see the figure below for details. Note: The AC adapter must connect to the slave LCD screen, or the slave screen will have no power supply. Connecting to Headphones Connect the headphones to the right side of the player for private listening. When headphone is connected, the speakers will automatically turn off. 7 Power Supply Preparation Using the AC Adapter 1. Connect AC adapter to the jack marked DC 9. 5V IN on the right side of the slave LCD screen in, as shown below. [. . . ] - Make sure your system connection is correct. - Make sure the video source is correct. Others possibilities: Static or other external interference may cause the unit display abnormally. In order to recover normal status, unplug the power-supply cord and then plug it in to reset the unit. [. . . ]